We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Systor 1:1 SATA duplicator with LCD screen and dual hot-swap drive bays

Systor

Systor 1:1 SATA Duplicator & Sanitizer SYS601DP 600MB/s 36GB/min 128MB buffer

SKU CH-9QMA-A37FW

Standalone SATA duplicator and sanitizer copies one drive to another at 600 MB/s with 128 MB buffer and DoD 5220.22‑M erase

  • Target range1 to 1
  • Buffer size128 MB
  • Transfer speed36.0 GB/min (600 MB/sec)
  • Display typeLCD Screen
  • Operating modeStandalone
  • ConnectionSATA

TARGET SIZE 1 to 01

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Standalone operation means no computer or software needed
  • 600 MB/s transfer rate copies up to 36 GB per minute
  • 128 MB buffer ensures stable high-speed duplication
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Hot-swap bays accept 2.5" and 3.5" SATA drives directly

Standalone SATA Duplicator & Sanitizer

Clone or erase SATA hard drives and SSDs without a host computer. The unit copies sector-by-sector or file-by-file at up to 600MB/sec and supports both 2.5 and 3.5 inch drives natively. It is built for IT departments, forensic labs and anyone who needs verified duplicates or certified data destruction on demand.

Thermals, Noise & Power Draw

Dual 40mm rear fans and per-bay outtake fans move air across every drive during long copy or erase jobs. The 250 W supply auto-ranges across 115/230 V at 50/60 Hz so the system runs continuously without external cooling aids. Acoustic output is typical for a rack-mount duplicator under sustained load.

Bundled Extras & Compliance

DoD 5220.22-M multi-pass sanitisation is built into the firmware, giving audit-ready erasure without extra software. The LCD screen reports progress and verification status for each session. No host-side drivers or licences are required, keeping the workflow completely standalone.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $661.99
Cheaper than about 76% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSystor
Product typeHard Drive Duplicator
Performance
Transfer speed36.0 GB/min (600 MB/sec)
Memory
Buffer size128 MB
Display
Display typeLCD Screen
Ports & slots
ConnectionSATA
Power
Power supply115/230 V, 50/60 Hz, 250 W
In the box
In the boxSee pictures for details
More details
Target range1 to 1
Operating modeStandalone

Other versions of this model

5 more in the same range

Questions about this item

How do I install the SATA source and target drives into the SYS601DP duplicator, and which step do people often get wrong?

Insert each 3.5 or 2.5 inch drive into the hot-swap bays until the SATA connector seats firmly; the step people miss is waiting for the LCD to show both drives detected before pressing the copy button.

What maintenance or replacement will the SYS601DP need later?

The 40 mm rear fan and the per-port outtake fans are the only moving parts; clean dust from the vents periodically and replace a fan if it becomes noisy or stops spinning.

What limit appears first during sustained high-speed duplication on the SYS601DP?

The 128 MB buffer can fill if the target drive writes slower than the 600 MB/s peak rate, causing the duplicator to throttle until the buffer drains.

More in Disc, USB & SD Duplicators

Similar items