We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone SATA duplicator with nine hot-swap slots and LCD screen

Systor

Systor 1-to-9 SATA Duplicator SYS209HS-DP Dual Port Hot Swap

SKU CH-YNM4-M2C56

Standalone SATA duplicator copies one source to nine targets at 150 MB/s with DoD 5220.22-M sanitisation

  • Target range1 to 9
  • Buffer size128 MB
  • Transfer speed9.0 GB/min (150 MB/sec)
  • Display typeLCD Screen
  • Operating modeStandalone
  • ConnectionSATA

TARGET SIZE 1 to 09

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • 1-to-9 target ports copy up to nine drives simultaneously
  • 150 MB/s transfer rate — 9.0 GB per minute
  • DoD 5220.22-M compliant sanitisation with multiple erase modes
  • Hot-swap bays accept 2.5" and 3.5" SATA drives without adapters

1-to-9 SATA Duplicator with Dual-Port Hot Swap

This standalone duplicator copies or sanitises up to nine SATA hard drives or solid-state drives at once. It accepts both 2.5 and 3.5 inch form factors without adapters and operates without a host computer. A built-in LCD screen reports progress and status for each port.

Upgrades from single-bay copiers

IT teams and data-recovery labs that need to duplicate or wipe many drives per shift will cut cycle time by running nine targets in parallel. The jump is worth it when throughput matters more than occasional single-drive tasks and when DoD 5220.22-M compliant sanitisation is required on site.

128 MB buffer and 150 MB/s peak transfer per port

The buffer absorbs burst traffic so sustained copies run close to the rated 9.0 GB/min across all active bays. Whole-media and system-and-files modes are supported, but very large drives or heavily fragmented sources will extend each session beyond the nominal rate.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $1,235.99
Cheaper than about 56% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSystor
Model name662712130996
Product typeHard Drive Duplicator
Panel colorBlack
Performance
Transfer speed9.0 GB/min (150 MB/sec)
Memory
Buffer size128 MB
Storage
Loading mechanismSlot
Display
Display typeLCD Screen
Ports & slots
ConnectionSATA
Power
Power supply115/230 V, 50/60 Hz, 300 W
In the box
In the boxSee pictures for details
More details
Target range1 to 9
Operating modeStandalone

Other versions of this model

5 more in the same range

Questions about this item

What drive sizes fit the duplicator bays without adapters?

The duplicator accepts 2.5 inch and 3.5 inch SATA drives directly in its hot-swap slots.

How is the duplicator installed and what step is commonly missed?

Connect the 115/230 V 300 W power supply, insert source and target drives into the slots, then select copy mode on the LCD before starting.

What maintenance will the duplicator need over time?

The 40 mm rear and per-port cooling fans should be kept clear of dust; the 128 MB buffer and LCD require no user service.

More in Disc, USB & SD Duplicators

Similar items