We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rackmount SATA duplicator with four front drive slots and LCD screen

Systor

Systor SYS304RMHDD-DP 1-to-4 SATA Duplicator 300MB/s

SKU CH-XPKY-NE105

Standalone rackmount duplicator copies or sanitises up to four SATA drives at 300 MB/s without a host computer

  • Target range1 to 4
  • Buffer size128M
  • Supported mediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
  • Transfer speed300 MB/s
  • Supported languagesEnglish or Japanese
  • Display typeLCD Screen

DATA TRANSFER RATE Rackmount - 18.0GB/min [300MB/sec]

TARGET SIZE 1 to 04

  • Standalone operation with no PC required
  • Copies up to four drives at 300 MB/s
  • Quick-copy FAT, NTFS and Linux partitions
  • DoD 5220.22-M compliant sanitisation modes
  • Supports 2.5 and 3.5 inch drives adapter-free

Rackmount SATA Duplicator 1-to-4

The Systor SYS304RMHDD-DP is a standalone rackmount duplicator that copies one SATA source drive to up to four target drives at once. It operates without a host computer and reaches a transfer rate of 300MB/s. The unit supports both 3.5" and 2.5" hard drives or solid-state drives without extra adapters. A 128MB buffer helps sustain throughput during simultaneous duplication.

For IT teams sanitising or cloning SATA drives

This duplicator suits organisations that need quick, standalone cloning of FAT16, FAT32, NTFS or Linux EXT2/EXT3/EXT4 volumes, plus whole-media copies of any format. It also provides DoD 5220.22-M compliant sanitisation for secure erase requirements. It is not for environments that require more than four targets per run, or for workflows that depend on interfaces other than SATA.

300MB/s SATA transfer rate decides fit

The single specification that determines suitability is the 300MB/s maximum copy speed across all four ports. If your project demands higher throughput or non-SATA connectivity, this model will not meet the requirement.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $1,744.99
Pricier than about 56% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSystor
Model nameSYS304RMHDD-DP
Product typeHDD Duplicator
Panel colorBlack
Performance
Transfer speed300 MB/s
Memory
Buffer size128M
Storage
Loading mechanismSlot
Display
Display typeLCD Screen
Compatibility
Supported mediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
Software
Supported languagesEnglish or Japanese
More details
Target range1 to 4
Operating modeStandalone
Environmental specOperating Humidity: 15% ~ 90%

Other versions of this model

5 more in the same range

Questions about this item

How do I install drives in the Systor SYS304RMHDD-DP and what step is often missed?

Insert each 2.5 or 3.5 SATA drive directly into a slot — no adapter needed — then verify the LCD shows every target detected before starting a copy job.

What maintenance or replacement will the duplicator need over time?

The 40 mm rear fans and per-port outtake fans should be cleaned regularly and replaced if airflow drops, while the power supply is built for continuous operation.

What limit appears first during sustained duplication on this unit?

The 300 MB per second transfer ceiling (18 GB per minute) is the bottleneck; buffer memory is 128 MB and the DoD 5220.22-M erase passes add further time.

More in Disc, USB & SD Duplicators

Similar items