Panasonic BK-3MCCA8BA Eneloop AA 2000mAh 2100 Cycle 8 Pack
- 8-pack
- AA Ni-MH
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
3.6 V AA lithium-thionyl-chloride cell delivers 2.1 Ah capacity, 120 mA continuous and 200 mA pulse current, operates from –60 °C to +85 °C and retains charge for over 10 years in storage
The Tadiran TL-2100/S is a 3.6 V AA lithium thionyl chloride primary cell rated at 2.1 Ah. It delivers a high, stable operating voltage and very low self-discharge, retaining over 99 % of its charge after one year at 20 °C. The button-top termination fits standard AA holders. It is built for long-life, low-drain applications where replacement access is difficult.
This cell suits utility meters, alarms, GPS trackers, data loggers and memory-backup circuits that draw continuous currents up to 120 mA and occasional pulses up to 200 mA. It operates from -60 °C to +85 °C and resists humid environments. It is not for devices needing rechargeable cells, higher continuous current or a flat-top terminal. Designers requiring a rechargeable chemistry or currents above 200 mA should select a different power source.
The single deciding specification is the 2.1 Ah capacity combined with a non-rechargeable lithium thionyl chloride chemistry. This fixes the energy budget and rules out any design that expects to recharge the cell in situ. Verify that the load profile stays within the 120 mA continuous and 200 mA pulse limits before specifying this battery.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
No published specifications for this item yet.
Measure the open-circuit voltage with a multimeter; a fresh cell should read close to 3.6 V. Under a load up to 120 mA continuous or 200 mA pulse the voltage should remain stable, confirming the lithium thionyl chloride chemistry is working as intended.
The package contains the single AA-size ER14505 cell with button-top termination. No holder, leads, charger or additional hardware is supplied; any mounting hardware or protection circuitry required by your application must be sourced separately.
This model is offered in a single 2.1 Ah capacity. If your equipment specifies ER14505, TL-2100/S, LS-14500, XL-060F or any of the listed compatible part numbers, this 2.1 Ah cell is the correct version to use.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?