Panasonic BK-3MCCA8BA Eneloop AA 2000mAh 2100 Cycle 8 Pack
- 8-pack
- AA Ni-MH
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
3.6 V lithium thionyl chloride cell in 2/3 AA size with 1.5 Ah capacity and spot-welded tabs for direct PCB mounting
This primary lithium battery uses a 2/3 AA form factor with spot-welded tabs for direct PCB mounting. It delivers a nominal 3.6 V and 1.5 Ah capacity for long-life, low-drain applications such as utility metering, alarm systems and industrial sensors. The non-rechargeable chemistry suits designs that require years of unattended operation.
The cell supports a maximum continuous current of 75 mA and can supply pulse currents up to 150 mA. Voltage remains stable across most of the discharge life and the operating range spans -60 °C to +85 °C. Self-discharge is below 1 % per year at +20 °C, so capacity is largely retained during extended storage or standby periods.
Solder only to the pre-welded tabs; never apply heat directly to the can. Observe correct polarity and avoid mixing this model with other battery types in series. The inorganic electrolyte is corrosive if the seal is breached, so handle carefully and store in a clean, cool, dry, ventilated area not exceeding +30 °C.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
No published specifications for this item yet.
The chemistry delivers a stable 3.6 V with a maximum continuous current of 75 mA and pulse capability of 150 mA, so self-heating remains minimal during long-term low-drain operation.
The PCB or holder needs through-hole pads or spring contacts spaced for the 33.5 mm height and 0.57 in diameter so the pre-attached tabs can be soldered or pressed directly without extra wiring.
Yes — the TL-5955/T shares the 2/3 AA form factor and 3.6 V nominal voltage with the TL-2155, TL-5155 and Xeno XL-055F, allowing direct substitution in existing battery compartments.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?