We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue USB 3.0 Type-A male to Mini USB 10-pin B cable, 1.8 m

TeKit

TeKit NTRC100100221W USB 3.0 A Male to Mini USB 10-Pin B Cable 1.8m Black & Blue

SKU CH-WRR9-VEY6C

A SuperSpeed USB 3.0 Type-A male to Mini USB 10-pin B cable, 1.8 metres long, for connecting 2.5-inch hard-disk enclosures and other Mini USB 3.0 devices

  • Connection typeUSB3.0 MALE TO MINI USB CABLE
  • Cable length5.91 ft (1.8 m)
  • Connector count2
  • Connector detailsUSB3.0 MALE TO MINI USB CABLE
  • Connector genderMale to Male
  • Product typeUSB3.0 MALE TO MINI USB CABLE
  • SuperSpeed USB 3.0 transfers data faster than USB 2.0
  • 8 m cable length gives flexible desktop placement
  • Mini USB 10-pin B connector fits 2.5-inch hard-disk enclosures
  • Male-to-male design links host and device directly
  • Black and blue jacket aids quick cable identification

USB 3.0 Type-A to Mini USB 10-Pin B cable

This TeKit cable connects a USB 3.0 Type-A host port to a Mini USB 10-pin B device. It is built for external 2.5-inch hard drive enclosures and other peripherals that use the Mini USB 3.0 interface. The 1.8 metre length suits desktop and laptop setups.

Check your device port before ordering

The Mini USB connector fits only USB 3.0 Mini-B ports, not the older USB 2.0 Mini-B sockets found on many cameras or MP3 players. Verify that your enclosure or device specifies a 10-pin Mini USB 3.0 port. A standard USB 3.0 Type-A port on the host side is required for SuperSpeed operation.

Sustained transfer performance

The cable supports USB 3.0 SuperSpeed data rates for continuous reads and writes to mechanical drives. Signal integrity over the 1.8 metre run keeps throughput stable during long backup or imaging sessions. No active electronics are present, so performance depends on the host controller and drive capabilities.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 60% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameTeKit
Model nameNTRC100100221 W
Product typeUSB3.0 MALE TO MINI USB CABLE
Product colorBlack & Blue
Ports & slots
Connection typeUSB3.0 MALE TO MINI USB CABLE
Connector count2
Connector detailsUSB3.0 MALE TO MINI USB CABLE
Connector genderMale to Male
Size & build
Cable length5.91 ft (1.8 m)
Overall length< 6 ft

Questions about this item

Does the TeKit NTRC100100221W cable include any adapters or need separate drivers?

The cable is a single 1.8 m USB 3.0 Type-A male to Mini USB 10-Pin B male assembly with two connectors. No adapters or drivers are included.

The specs list 1.5 m and 1.8 m lengths — which one is correct?

The manufacturer highlights and detailed description state 1.5 m (5 ft), while the specification table shows 5.91 ft (1.8 m). Both figures refer to the same cable.

Will the SuperSpeed USB 3.0 rating deliver 3.0 speeds on my 2.5-inch external hard drive enclosure?

The cable supports SuperSpeed USB 3.0 transfer rates when connected to a USB 3.0 host port and a device with a Mini USB 10-Pin B 3.0 port. On USB 2.0 ports it falls back to 2.0 speeds.

More in USB Cords & Extension Cables

Similar items