We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical inductive proximity sensor in 303 stainless steel with 2m cable

Telemecanique Sensors

Telemecanique Sensors XS608B1NBL2 inductive proximity sensor 8 mm

SKU CH-3Q4Q-N0H69

8 mm shielded inductive sensor detects metal at 2.5 mm, runs on 12 to 24 V DC, outputs 3-wire NPN NC, IP67-rated 303 stainless body, 41 mm long

  • Detects metal at 2.5 mm max range
  • Operates on 12 to 24 V DC supply
  • IP67 and NEMA 4X rated for harsh environments
  • 200 mA NPN NC output for PLC integration
  • 303 stainless steel body withstands -13 to 158 °F

8 mm inductive sensor for industrial automation

The Telemecanique Sensors XS608B1NBL2 is an 8 mm cylindrical inductive proximity sensor built for machine-level presence detection. Its shielded construction and 303 stainless-steel body suit harsh production environments where coolant, vibration and frequent wash-downs occur.

2.5 mm sensing range with 2.5 kHz switching

Rated for a maximum detecting distance of 2.5 mm, the sensor reliably picks up ferrous targets at close range. The 2,500 Hz operating frequency supports fast cycling on conveyors or indexing tables, while the 200 mA NPN normally-closed output drives PLC inputs directly without an intermediate relay.

IP67 and NEMA 4X protection from -13 °F to 158 °F

A 2 m integral cable and fully potted electronics meet IP67 and NEMA 4X sealing, resisting water jets and corrosion across a -13 °F to 158 °F operating window. The 12 to 24 V DC supply draws only the load current, so heat rise stays negligible inside enclosed panels.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $87.99
Pricier than about 67% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameTELEMECANIQUE SENSORS

Questions about this item

Will the 12 to 24V DC supply work with my existing 24V DC control panel?

Yes, the sensor operates from 12 to 24V DC, so a standard 24V DC panel is within range.

How can I verify the 2,500 Hz switching frequency is performing correctly after wiring?

Use an oscilloscope on the NPN output; a clean square wave at the target passage rate confirms the 2,500 Hz spec.

Does the 2 m cable come terminated, or do I need a separate connector?

The 2 m cable is supplied attached; no extra connector is required unless your panel needs a specific plug.

More in Contactors, Relays & Motor Starters

Similar items