We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical nickel-plated brass inductive sensor, 12 mm diameter, 53 mm length, 2 m cable

Telemecanique Sensors

Telemecanique Sensors XS612B1MAL2 Inductive Proximity Sensor 12 mm

SKU CH-SFB0-ZHAKW

12 mm cylindrical inductive proximity sensor with 4 mm detection, 24–240 V AC/DC supply, 2-wire NO output, IP68/IP69K nickel-plated brass housing, 53 mm length, -13 °F to 158 °F operating range.

  • Detects metal targets at 4 mm range
  • Wide 24 to 240 V AC/DC supply compatibility
  • Rugged IP68 and IP69K sealed housing
  • Nickel-plated brass case withstands -13 to 158 °F
  • 2-wire NO output with 2 m cable included

Industrial 12 mm inductive sensor

This 12 mm cylindrical inductive proximity sensor detects metal targets at up to 4 mm. It operates on 24 to 240V AC/DC supply and uses a two-wire normally open output. The nickel-plated brass housing meets IP68 and IP69K protection with a NEMA 4X rating. It is suited for machine automation and harsh industrial environments.

Upgrade from lower-spec sensors

The wide voltage range replaces separate AC and DC models in mixed-voltage panels. Shielded construction allows flush mounting where unshielded sensors would false-trigger. The 25 Hz AC and 1000 Hz DC switching frequencies support faster cycle rates than basic 10 Hz units. Choose this when wiring simplicity and environmental sealing are priorities.

4 mm range with 200 mA load

The sensor reliably detects ferrous targets within 4 mm while driving loads up to 200 mA. The 2 m pre-wired cable simplifies installation in cabinets and on moving arms. Operating temperature spans -13 to 158 °F for outdoor and wash-down duty. It runs out of range for non-metallic materials or targets beyond 4 mm.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $68.99
Pricier than about 55% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameTELEMECANIQUE SENSORS

Questions about this item

What diameter cut-out does the 12 mm cylindrical body need for mounting?

The sensor has a 12 mm threaded barrel, so a 12 mm clearance hole is required; the nickel-plated brass case is 53 mm long overall.

How do I wire the two-wire 24 to 240 V AC/DC output, and what mistake should I avoid?

Connect the two cable leads in series with the load; do not apply power without a load, or the 200 mA maximum current rating will be exceeded and the sensor may fail.

The IP68 and IP69K ratings suggest wash-down use — what maintenance will the 2 m cable need?

Inspect the cable jacket regularly for cuts or abrasion; the sensor itself is sealed to IP68 and IP69K, but the cable is the only part exposed to mechanical wear.

More in Contactors, Relays & Motor Starters

Similar items