We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical inductive sensor with 2m cable

Telemecanique Sensors

Telemecanique Sensors XS612B1PAL2 Inductive Proximity Sensor 12mm PNP NO

SKU CH-DS26-C8F5H

A 12 mm shielded inductive proximity sensor with PNP normally-open output, 4 mm sensing range, 2 m cable and IP68/IP69K nickel-plated brass housing

  • Detects metal at 4 mm with 12 mm barrel
  • Shielded inductive sensing resists interference at 2 500 Hz
  • PNP NO 3-wire output handles 200 mA load
  • Nickel-plated brass housing rated IP68 and IP69K
  • Operates from 12 to 48 V DC across -13 to 158 °F

12 mm Inductive Sensor for Industrial Detection

The Telemecanique Sensors XS612B1PAL2 is a shielded inductive proximity sensor built for 12 mm mounting holes. It targets machine builders and maintenance teams who need reliable metal detection on automated lines. A 4 mm sensing range suits close-range presence checks. The PNP normally-open output integrates directly with standard PLC input modules.

Nickel-Plated Brass Housing

The cylindrical case uses nickel-plated brass to resist coolant, oil and mechanical wear. Full epoxy potting meets NEMA 4X, IP68 and IP69K ratings, so the sensor survives high-pressure washdowns and continuous immersion. A fixed 2 m cable exits the rear, removing the need for a separate connector and reducing leak paths in wet environments.

Replaces Worn 12 mm Sensors

Swap out a failed 12 mm inductive sensor without re-drilling the mounting bracket. The 12 to 48 V DC supply range lets the unit replace older sensors that required a single fixed voltage. The jump is worth it when the application demands IP69K washdown survival or a 2.5 kHz switching frequency for faster cycle times.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $70.99
Pricier than about 57% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameTELEMECANIQUE SENSORS

Questions about this item

What voltage range does the 3-wire PNP output circuit accept?

The sensor operates from 12 to 48 V DC on its 3-wire PNP output circuit.

What thread size and clearance does the 12 mm shielded barrel need?

The 12 mm nickel-plated brass barrel is 41 mm long and requires an M12×1 mounting hole with a flat seat for the shielded face.

How do I wire the brown, black and blue leads so the NO output works?

Connect brown to +12–48 V DC, blue to 0 V, and the black lead becomes the switched PNP output that closes when metal enters the 4 mm sensing zone.

More in Contactors, Relays & Motor Starters

Similar items