We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow metal emergency pull switch with cable eye on right side

Telemecanique Sensors

Telemecanique Sensors XY2CE3A010H7 Emergency Cable Pull Switch 1NO/1NC 165 ft span

SKU CH-ZH6E-7SAZZ

Emergency cable pull switch with 1NO/1NC contacts covers a 165 ft span and resets by push button

  • 165 ft cable span covers long conveyor runs
  • 1NO/1NC contacts give both run and stop signals
  • 3 A at 240 V AC rating suits industrial control circuits
  • Zamak housing with NEMA 1, 12, 4 resists dust and water
  • Push-button reset restores operation without tools

Emergency Cable Pull Switch, 165 ft Span

The Telemecanique Sensors XY2CE3A010H7 is a safety-rated emergency stop device designed for conveyor lines and machinery corridors up to 165 ft in length. It provides a single-cable pull actuation with a push-button reset, suited for industrial environments requiring accessible emergency shutdown points along extended runs.

1NO/1NC Contact Form with NEMA 1, 12, 4 Enclosure

The switch combines one normally open and one normally closed contact, allowing simultaneous signal and safety-circuit interruption. Its Zamak housing carries NEMA 1, 12, and 4 ratings for indoor protection against dust, dirt, and water ingress, while the 1/2 in NPT wiring entry simplifies conduit installation on the right-hand side.

AC 3 A at 240 V and DC 0.27 A at 250 V Thermal 10 A

The contacts are rated for 3 A at 240 V AC and 0.27 A at 250 V DC, with a thermal current capacity of 10 A. This suits standard safety-relay and PLC input circuits, but the switch is not intended for direct high-power load switching or applications requiring momentary-contact operation beyond the specified reset function.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $353.99
Pricier than about 92% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameTELEMECANIQUE SENSORS

Questions about this item

How often should the Zamak housing and internal contacts be inspected or replaced on the XY2CE3A010H7?

The Zamak case and 1NO/1NC contacts have no published service interval; inspect after any activation and during routine safety audits to confirm the push-button reset latches cleanly and the 10 A thermal rating has not been exceeded.

What limits continuous operation of the XY2CE3A010H7 during a prolonged emergency stop?

The 10 A thermal amperage rating and 3 A @ 240 V AC contact rating are the first limits reached; sustained current above 10 A will cause thermal trip, while the 0.27 A @ 250 V DC rating caps DC loads.

How much heat and noise does the XY2CE3A010H7 generate when the cable is tensioned all day?

The switch is a passive mechanical device with no indicator lamp or powered coil, so it produces no audible noise and negligible heat; only the 1/2 in NPT wiring entry and cable tension remain under load.

More in Contactors, Relays & Motor Starters

Similar items