Telemecanique Sensors XZCPV1865L2 2 m 18 AWG 4 A Yellow cordset
A 2 m yellow PVC cordset with a straight 3-pin female connector and bare-wire leads, rated 4 A at 250 VAC/300 VDC, IP65/IP67 sealed, CSA/IEC/UL listed, operating from -13 °F to 176 °F
- Ready for harsh environments with IP65 and IP67 rating
- Operates from -13 °F to 176 °F for wide temperature range
- CSA certified, IEC and UL listed for safety compliance
- 2 m yellow PVC jacketed cable with 18 AWG wires
- 4 A at 250 VAC / 300 VDC for reliable power delivery
Product identity
This Telemecanique Sensors cordset is a 2 m PVC-jacketed cable assembly rated for 4 A and 250 VAC or 300 VDC. It suits industrial machinery and control-panel wiring where a single straight female connector meets bare wire ends.
Thermals and power
The assembly operates between -13 Degrees F and 176 Degrees F while carrying its rated 4 A load. IP65 and IP67 ratings confirm dust-tight protection and resistance to temporary immersion, so environmental sealing does not degrade under normal thermal cycling.
Build and connections
A yellow PVC jacket provides visible identification and abrasion resistance in cable trays. The 18 AWG conductors terminate in a straight 1/2 in -20 thread female connector with three pins at one end and stripped bare wire at the other, allowing direct termination to terminal blocks or splices. CSA, IEC and UL listings confirm compliance with North American and international safety standards. Not suited for applications requiring shielded conductors, higher pin counts or armoured cable.
How it compares
Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 85% of the 1,098 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | TELEMECANIQUE SENSORS |
Questions about this item
How do I connect the 1/2 in. -20 female end and what step is often missed?
Thread the female connector onto the mating male receptacle until the 1/2 in. -20 threads seat fully; the step often missed is tightening to the specified torque so the IP65 and IP67 seals compress evenly.
What maintenance or replacement will the PVC-jacketed 18 AWG cable need over time?
Inspect the yellow PVC jacket periodically for cuts, abrasion or UV cracking; replace the cordset if the insulation is damaged or if the 4 A rating can no longer be carried safely.
What is the first limit reached during sustained use at the 4 A rating?
The 176 °F maximum operating temperature is the first limit; continuous 4 A loads in high ambient heat can push the conductor temperature to this ceiling.
More in Contactors, Relays & Motor Starters
Similar items
Snapconnect SNAP1221ILR Illuminated Toggle Contactor 20 A Red 120/277V AC
TORK nsi DWZ200B Electronic Timer 365 Day SPDT 20A 120-277VAC
- IEC Delay Timers





