Tempco CSH00324 Strip Heater 240V 500W 8 in
240 V strip heater delivers 500 W from a seamless 304 stainless-steel sheath with 34 W/sq in density and 1 200 °F maximum temperature
- 500 W output for rapid heating
- 240 V operation matches industrial supply
- 34 W/sq in density enables compact design
- Seamless 304 stainless sheath resists corrosion
- CSA, cURus and UL 499 certified for safety
240 V 500 W Strip Heater
The Tempco CSH00324 is a 240 V strip heater rated at 500 W with an overall length of 8 in. It uses a seamless 304 stainless steel sheath and carries CSA, cURus and NRTL recognition under UL 499 and Canadian Standard C 22.2 No 72. The unit mounts via surface-mount tabs with 1/2 in by 5/16 in slotted holes.
Replacing Lower-Wattage or Worn Elements
This heater replaces older strip elements that no longer deliver the required 500 W at 240 V or that have corroded sheaths. The jump is worth it when the application demands a maximum sheath temperature of 1200 °F and a watt density of 34 W/sq in for consistent heat output.
Build Integration and Mounting
The 7 in mounting dimension and 10-32 screw size let the heater fasten directly to machinery frames or platens. Parallel terminals simplify wiring in single-phase circuits, while the slotted holes allow slight positional adjustment during installation. The recognised safety standards support compliance in regulated equipment builds.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $41.99
- Typical for this category: the median of 1,762 items is $45.99.
Specifications
| Product | |
|---|---|
| Brand name | TEMPCO |
Questions about this item
What are the slotted mounting-hole dimensions on the 8 in strip heater?
The heater has slotted holes 1/2 in long by 5/16 in wide on 7 in mounting centres, accepting 10-32 screws for surface-mount installation.
Which wiring step is most often missed when connecting the parallel terminals?
Installers frequently forget to torque the 10-32 terminal screws to spec after landing both leads on the parallel posts, leaving a loose connection that overheats.
How do I know when the 304 stainless-steel sheath needs replacement?
Replace the unit if the sheath shows discoloration, pitting or deformation after prolonged exposure near the 1,200 °F rating, as these indicate material fatigue.
More in Heating & Cooling Controllers
Similar items
Mroinge M721 Non-Programmable Heat Pump HVAC Control 2H/1C 24V 12 Pack
- 24 V AC
- Temperature Sensor,…
Suuwer S701 Non-Programmable Thermostat 1H/1C Blue Backlight 12 Pack
- 24 V AC
- Suuwer Thermostat,…
Suuwer S701 Non-Programmable Thermostat Green Backlight
- 24 V AC
- Suuwer Thermostat,…





