We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI ports optical audio 3.5mm jack RCA connectors and volume knob

Tendak

Tendak HDMI Audio Extractor 4K@60Hz Optical 3.5mm RCA Volume Control 2 in 1 accessory

SKU CH-X27T-WV6B6

Extracts audio from a 4K 60 Hz HDMI source to optical, 3.5 mm and RCA outputs with a volume knob

  • Extract 5.1-channel surround via optical to soundbar
  • Connect headphones or speakers through 3.5 mm stereo jack
  • Output analogue stereo to amplifier via RCA L/R
  • Adjust analogue volume directly with built-in knob
  • Pass 4K@60 Hz HDR video with HDCP 2.2 compliance

What It Is

The Tendak HDMI Audio Extractor is a 2-in-1 accessory that takes an HDMI 2.0 signal, passes the video through to a 4K display, and splits the audio to optical S/PDIF, 3.5 mm stereo and RCA L/R outputs. A built-in volume knob controls the analog output level.

Who It Suits

Ideal for users with a source device that lacks an optical audio port or cannot send audio over HDMI, and who need to feed a soundbar, surround receiver, headphones or powered speakers. Buyers who require HDMI 2.1 bandwidth for higher refresh rates, or who need to extract audio from eARC sources, should look at a different solution.

Key Specification

Supports HDMI 2.0 video up to 4K at 60 Hz with RGB 4:4:4 and YUV 4:4:4 chroma, HDCP 2.2 and 1.4, HDR10, and 5.1-channel audio on optical plus 2.0-channel analog on 3.5 mm and RCA.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $48.99
Cheaper than about 62% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What HDMI source and display do I need to use the Tendak extractor at 4K@60Hz?

Connect any HDMI 2.0 source such as a console or media player to the input, then run an HDMI 2.0 cable from the extractor output to a 4K@60Hz-capable display.

Will the extractor pass 1080p@60Hz and 720p signals from older devices without downscaling?

Yes, the unit is backward compatible with 1080p 3D@60Hz, 1080i and 720p, so legacy sources pass through at their native resolution.

How can I confirm the extractor is outputting 5.1-channel audio over optical after setup?

Play a test file encoded in AC-3, DTS or LPCM 7.1; your soundbar or AV receiver should indicate a 5.1-channel bitstream on its display.

More in 2-in-1 Device Accessories

Similar items