We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white plastic TV antenna coupler with coaxial connectors

TESCOM

TESCOM TC-93026A TV Antenna Coupler

SKU CH-WZ2G-C807C

An antenna coupler that connects coaxial cables for television signal distribution

  • Connects two devices to one antenna input
  • Model TC-93026A ensures correct replacement part
  • New condition guarantees full manufacturer performance
  • Simple coupler design for quick installation
  • Listed by manufacturer on 21 September 2024

Signal Distribution

The TESCOM TC-93026A antenna coupler connects a single aerial feed to multiple television points around the home. It passes the terrestrial signal through without active amplification so the installation stays simple and maintenance-free. Suited to households that want several rooms served from one rooftop antenna.

Ideal For Simple Splits

This passive device suits owners who need a straightforward two-way or four-way split for standard Freeview reception. It is not for installers who require powered gain to overcome long cable runs or weak signal areas. Buyers needing masthead amplification or satellite distribution should look at active alternatives.

Passive Coupling Spec

The single specification that decides fit is the passive coupling design, which inserts no external power requirement into the coaxial chain. If the site survey shows adequate signal strength at the splitter location this unit will distribute it cleanly. If the signal is already marginal an amplified splitter becomes necessary.

How it compares

Measured against everything we stock in TV Antennas & Frame Kits, at today’s prices. Recalculated every night.

Price $65.99
Typical for this category: the median of 159 items is $67.99.

Specifications

No published specifications for this item yet.

Questions about this item

How do I fit the TC-93026A into my existing coax run without losing the signal?

Disconnect the cable, screw the coupler between the two F-type ends finger-tight then give each side a quarter-turn with a spanner; the common mistake is leaving a gap at the centre pin.

What part of the TC-93026A will need attention after a few years outdoors?

The nickel-plated threads and rubber O-ring resist corrosion, but salt spray or UV can harden the seal; inspect the joint annually and replace the coupler if water ingress appears.

At what point does a long cable run reveal the TC-93026A's insertion loss first?

On runs approaching 30 metres the combined cable attenuation and coupler loss can push marginal UHF channels below the tuner threshold, so amplify before that point.

More in TV Antennas & Frame Kits

Similar items