We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 60 cm flexible amber LED strips in soft silicone, 15 mm wide, sequential turn signal with cool white DRL

The Perfect Part

The Perfect Part 2×60 cm sequential LED DRL turn signal strip car electronics accessory

SKU CH-1CK2-8QD9G

Two 60 cm flexible silicone strips provide white daytime running light and amber sequential turn signals at 12 V

  • Rated voltageDC 12 V
  • Product typeCar
  • Key featuresTurn signal lights Light up in flowing sequentially; Daytime
  • Product colorBlack
  • Main materialSoft Silicone
  • Size or dimensions60 cm × 15 mm × 3 mm
  • Sequential amber turn signals improve side visibility
  • Cool white daytime running light adds forward presence
  • Soft silicone housing conforms to curved headlight lenses
  • Two 60 cm strips cover both sides evenly
  • 12 V DC power suits standard vehicle electrics

Two 60 cm sequential LED strips

This accessory combines daytime running lights with sequential amber turn signals in a single flexible strip. Each unit measures 60 cm by 15 mm by 3 mm and operates on a 12 V DC supply. The soft silicone housing allows the strip to follow headlight contours during installation. Two strips are included for left and right headlight fitment.

Flowing turn signal under continuous use

The amber LEDs illuminate in a flowing water sequence when the turn signal is activated, rather than flashing all at once. Cool white LEDs serve as the daytime running light and remain lit while the vehicle is running. Both functions share the same low-profile strip, so heat output stays consistent during extended driving periods. The silicone material resists vibration and temperature cycling without degrading the light pattern.

Check headlight space and wiring before ordering

Verify that each headlight housing has at least 60 cm of continuous mounting surface for the strip. Confirm the vehicle uses a 12 V electrical system and identify the correct DRL and turn signal wires for tapping. The flexible silicone requires a clean, curved surface for proper adhesion. Buyers who need a shorter strip length or a non-sequential flashing pattern should look for a different product.

How it compares

Measured against everything we stock in Car Audio Accessories & Wiring, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 91% of the 2,768 comparable items (median $21.99).

Specifications

Product
Brand nameThe Perfect Part
Model nameDA129 LED DRL HL
Product typeCar
Product colorBlack
Power
Rated voltageDC 12 V
Size & build
Main materialSoft Silicone
Size or dimensions60 cm × 15 mm × 3 mm

Questions about this item

How much power does each 60 cm strip draw when the sequential turn signal runs all day?

Each strip operates on DC 12 V; the sequential amber LEDs draw a low current typical for flexible silicone DRLs, so heat stays minimal during continuous use.

What existing wiring or controller must the vehicle already have for these strips to function?

The strips need a 12 V supply switched with the ignition for the cool-white DRL and a separate 12 V feed from the factory turn-signal circuit to trigger the sequential amber flow.

Will the 15 mm wide silicone strips fit inside a headlight housing that currently uses a 129 mm halogen bulb?

At 15 mm wide and 3 mm thick the flexible strips can be routed around a 129 mm bulb cavity, but you must verify the housing depth and lens clearance before bonding.

More in Car Audio Accessories & Wiring

Similar items