We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 140mm ARGB case fans with interchangeable blades and magnetic frame design

Thermaltake

Thermaltake SWAFAN EX14 140mm ARGB case fan 3-pack CL-F170-PL14SW-A

SKU CH-PDX5-GD4SE MPN CL-F170-PL14SW-A

Three 140 mm ARGB fans with reversible blades, hydraulic bearings and PWM speeds from 500 to 2000 RPM

  • Fan size140 mm
  • Number of fans3 Fans
  • Fan controlNo Controller
  • Fan depth25 mm
  • Bearing designHydraulic
  • Rotational speedPWM 500 to 2000 R.P.M
  • Three fans deliver 81.6 CFM each at full speed
  • PWM control spans 500 to 2000 RPM for quiet or maximum airflow
  • Hydraulic bearing rated for long service life at 34.5 dB-A
  • Reversible blades included for push or pull configurations without extra parts
  • 5 V ARGB lighting syncs with motherboard software via 3-pin header

Three 140mm ARGB fans for white-themed builds

This pack contains three 140mm case fans finished in white with addressable RGB lighting. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM under PWM control. They are aimed at builders who want coordinated lighting and reversible airflow in a single kit.

Magnetic blades swap in seconds.

Standard blades come pre-installed and three reverse blades are supplied for push-pull or exhaust setups. The magnetic mounting lets you change orientation without tools. Because no fan controller is bundled, you must connect every unit to a 4-pin PWM header and a 5V 3-pin ARGB header on the motherboard.

Check for 5V ARGB headers and 140mm mounting points

Your board needs a 5V 3-pin ARGB connector and enough 4-pin PWM headers for three fans, or a powered hub. Verify that your case accepts 140mm fans at the intended locations and that 25mm thickness clears nearby components. The kit includes only frames, blades and cables.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $69.99
Pricier than about 90% of the 8,339 comparable items (median $19.99).
Fan size 140 mm
Higher than about 80% of the 1,114 comparable items (median 120 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThermaltake
Model nameSWAFAN EX14
Part numberCL-F170-PL14SW-A
Product typeCase Fan
Product colorWhite
Performance
Rotational speedPWM 500 to 2000 R.P.M
Airflow rateStandard Fan Blade: 81.6 CFM (one fan)
Reverse Fan Blade: 79.3 CFM (one fan)
Power
Power input connector2510-4 PIN PWM, 5 V ARGB header-3PIN
Size & build
Fan size140 mm
Number of fans3 Fans
Fan depth25 mm
Bearing designHydraulic
Product dimensions140 × 140 × 25 mm
Shipping weight1.32 kg
Package size203 × 170 × 150 mm
In the box
In the box3 x Fan Frames
3 x Standard Fan Blade (Pre-installed)
3 x Reverse Fan Blade
3 x Cable
Environment & compliance
Operating noiseStandard Fan Blade: 34.5 dB-A (one fan)
Reverse Fan Blade: 38.8 dB-A (one fan)
More details
Fan controlNo Controller
LED lightingARGB

Questions about this item

How do I confirm the three SWAFAN EX14 fans are spinning correctly after installation?

Connect the 2510-4 PIN PWM cables to the motherboard and use BIOS or fan-control software to verify each fan runs between 500 and 2000 RPM; listen for noise around 34.5 dB-A with standard blades or 38.8 dB-A with reverse blades.

What comes in the box and what must I supply myself for the CL-F170-PL14SW-A 3-pack?

The package includes three fan frames, three standard blades pre-installed, three reverse blades and three cables; you must provide a motherboard with a 2510-4 PIN PWM header and a 5V ARGB 3-pin header for lighting control.

Should I choose the standard or reverse blades for my SWAFAN EX14 setup?

Standard blades deliver 81.6 CFM at 34.5 dB-A per fan, while reverse blades give 79.3 CFM at 38.8 dB-A; use standard blades for intake and reverse blades for exhaust to balance airflow direction.

More in PC Cooling Fans

Similar items