We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium two-hole mechanical connector, hex socket head, silver finish

Thomas & Betts

Thomas & Betts Blackburn ADR35-22 Mechanical Connector 350 kcmil to 6 AWG

SKU CH-ZP74-KC3E0

Aluminium mechanical lug accepts 6 AWG to 350 kcmil stranded copper or aluminium conductors, dual 1/2 in holes on 1.22 in centres, rated 1 000 V at 194 °F

  • Product typeTwo, Aluminum Duct Rated
  • Accepts copper and aluminum conductors from 6 AWG to 350 kcmil
  • Two-hole tongue with 1.22 in spacing fits 1/2 in studs
  • Hex socket head allows secure torque with standard tools
  • Rated for 1,000 V and 194 Degrees F continuous operation
  • Aluminum body resists corrosion in duct and outdoor installations

Mechanical Connector for Aluminium and Copper

The Thomas & Betts Blackburn ADR35-22 is a mechanical lug rated for stranded copper conductors from 6 AWG up to 350 kcmil. It also accepts aluminium conductors in the same range. The body is aluminium and the connector carries a 1,000 V maximum voltage rating for industrial and automotive wiring.

Installation uses a hex socket on a two-hole tongue

The tongue measures 3 in long, 2.3 in wide and 0.31 in thick with two mounting holes of 0.5 in diameter spaced 1.22 in apart. A hex socket head allows tightening with a standard driver. Ensure the conductor is fully seated and the set screws are torqued to the manufacturer’s specification to avoid loose terminations.

Rated for 350 kcmil maximum conductor size

This single limit decides whether the lug matches your cable. It accommodates two conductors per termination and operates up to 194 Degrees F. Buyers needing a larger conductor range or a different stud size must select an alternative lug.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 65% of the 1,610 comparable items (median $25.99).

Specifications

Product
Brand nameThomas & Betts
Product typeTwo, Aluminum Duct Rated

Questions about this item

How can I verify the ADR35-22 is seated correctly after torquing the hex socket?

A fully seated connection shows the conductor visible through the inspection window and the lug tongue flat against the bus bar with no gap.

What hardware comes with the ADR35-22 and what must I supply?

The connector body is supplied; you must provide the 1/2 in mounting bolts, washers and the 6 AWG to 350 kcmil conductors.

Which version suits a 2-hole pattern on 1.22 in centres?

The ADR35-22 is the 2-hole version with 0.5 in diameter holes spaced 1.22 in apart.

More in Wire, Cable & Wiring Supplies

Similar items