Thomasville Lighting CLS16D-2-WT 2-pack 6.5in 12W 3CCT dimmable light kit
A two-pack of 6.5-inch flush-mount LED ceiling lights delivering 1200 lumens at 12 watts with dimmable 3000K, 4000K and 6500K colour temperatures
- Item nameHepside
- Care and useHallway; waterproof
- Item descriptionHepside, Plastic, LED, AC, 6.5 L x 6.5 W x 0.72 H inches
- Glass or shade materialClear Prismatic
- Size6.5 in-2pack
- Bulb typeLED
- Dimmable brightness from 10% to 100% with remote control
- Three colour temperatures 3000K, 4000K and 6500K selectable
- Low-profile 6.5 inch flush mount fits tight ceilings
- 12W LED delivers 1200 lumens equivalent to 120W incandescent
- Rated 25000 hour lifespan reduces replacement frequency
Two-pack flush-mount LED kit
The Thomasville Lighting CLS16D-2-WT kit supplies two 6.5-inch round fixtures for indoor or outdoor ceilings. Each unit draws 12 watts and delivers 1200 lumens from integrated LEDs behind a clear prismatic acrylic diffuser. The white finish suits kitchens, bedrooms, hallways or covered porches. Remote control adjusts both lights together.
Replaces twin 120 W incandescent sets
Swapping two 120 W traditional bulbs for this 12 W kit cuts power use by roughly 20 times while keeping the same brightness. The jump is worth it when you want lower electricity bills and a 25000-hour rated lifespan without rewiring. Buyers who need more than two fixtures or a different diameter should look elsewhere.
Steady output under continuous use
Fire-resistant plastic housing and a short-circuit-protected driver keep the LEDs stable during long evenings. No flicker or blue-light spike appears at any of the three colour temperatures (3000K, 4000K, 6500K) across the 10%-100% dimming range. The low-profile .72-inch depth stays cool enough for insulated ceilings.
How it compares
Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 70% of the 1,591 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | Thomasville Lighting |
| Model name | CLS16D-2-WT |
| Item name | Hepside |
| Recommended use | Indoor / Outdoor |
| Design style | Contemporary |
| Power | |
| Rated voltage | 120 V AC |
| Power consumption | 12 W |
| Size & build | |
| Product weight | 0.449 kg |
| Surface finish | White |
| Glass or shade material | Clear Prismatic |
| Size | 6.5 in-2pack |
| Installation type | Flush Mount |
| Main material | Acrylic |
| More details | |
| Care and use | Hallway; waterproof |
| Bulb type | LED |
| Control method | Remote Control |
Questions about this item
What ceiling opening does the 6.5 inch flush-mount base need?
The fixture measures 6.5 inches wide and 0.72 inches high, so it mounts directly to a standard junction box without a large cut-out.
Which wiring step is most often missed when installing the 120 V AC flush mount?
Connect the fixture’s supply wires to the house circuit with wire nuts and secure the grounding screw before snapping the acrylic diffuser into place.
When will the integrated 12 W LED array need replacement?
The LEDs are rated for 25000 hours of use; at typical daily run-times that equals many years before the whole unit is swapped.
More in LED Lighting Kits
Similar items
Litever LL-5V-2P-4000K 2 × 12" LED Light Kit 4000K
- Under Cabinets - Li…
- Kit
Unique-Bargains 4-Pin 10mm Male-to-Male LED Connector Black
YIGER DTI068 Light Kit 2-Pack Black 10in 2500mAh
- DTI068 - YIGER
- 2 x Motion Sensor c…
DESIGNERS EDGE L6020WH Motion Sensor 180 Degree 70 ft White
Thomasville Lighting Arixinks 3-pack LED light kit
- Arixinks
- Remote Control, 3 P…





