Thomasville Lighting Motion Sensor LED Ceiling Light HENTAG 9 Inch 12W 6500K

12W 6500K Motion Sensor Ceiling Light

This 9-inch flush-mount fixture uses a built-in PIR and light sensor to activate automatically when movement is detected within a 160° angle and 9.8-13 ft range. It delivers cool white illumination at 6500K while drawing only 12W, with an LED chip rated above 85 CRI. The light suits indoor spaces such as hallways, closets, porches and laundry rooms where hands-free operation is convenient.

Check Wiring Voltage and Switch Type

The unit is hardwired for 110V circuits and must not share a circuit with other lights. A standard on/off wall switch is required; dimmer switches are incompatible. Verify the mounting location allows the recommended 6-11 ft installation height and that the 9.05-inch square footprint fits the junction box. Avoid placing the sensor near doors or windows where it may detect motion through barriers.

Replaces Manual Switch Fixtures in Low-Traffic Areas

This light replaces a conventional ceiling fixture that requires manual switching, adding automatic shut-off after the detection zone clears. The upgrade is worthwhile where lights are frequently left on by accident, such as storage closets or stairwells. It is not suited for spaces needing continuous illumination or dimmable control, and the 3-month warranty covers only the initial period.