Tiffen 67CP 67mm Circular Polarizer camera filter

67mm Circular Polarizer for camera lenses

This Tiffen 67CP filter threads onto any lens with a 67mm front thread. It blocks polarized light to cut glare from water, glass and other non-metallic surfaces while boosting colour saturation and contrast. Photographers who shoot outdoors, through windows or around reflective materials will see the difference immediately.

Simple screw-on installation, watch for vignetting

The filter mounts by turning it clockwise onto the lens threads until snug; no tools or adapters are required. Rotate the outer ring while looking through the viewfinder or screen to dial in the desired polarization angle. On ultra-wide lenses the additional glass thickness can darken frame corners, so check the edges at your widest focal length after fitting.

Verify your lens thread before ordering

Confirm that the front of your lens is marked 67mm or Ø67; other diameters will not accept this filter. Ensure the threads are clean and undamaged so the filter seats flat without cross-threading. If you use a lens hood, check whether it can still mount over the filter or if you need a slim-profile hood instead.