Timetec Hynix IC 16GB (2x8GB) DDR3 1066MHz CL7 1.5V laptop RAM
- 16 GB (2 × 8 GB)
- DDR3 1066
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-voltage 16 GB DDR3/DDR3L kit runs at 1333 MHz CL9 for desktop upgrades
Capacity 16GB (2 x 8GB)
Speed DDR3 1333
Color Black PCB
Timetec MR-H8GD313U7C supplies 16 GB of desktop memory as two 8 GB UDIMM modules. Each stick runs at 1333 MHz with a CAS latency of CL9 and conforms to the PC3-10600 standard. The dual-rank 2Rx8 organisation uses 512x8 ICs on a 240-pin interface. Voltage is selectable at 1.35 V or 1.5 V, matching both DDR3 and DDR3L requirements.
Builders upgrading an Intel or AMD desktop that accepts 240-pin DDR3 or DDR3L memory will find the kit a direct fit. The 16 GB total capacity helps multitasking on platforms limited to two DIMM slots. Systems that require ECC, registered modules, laptop SO-DIMMs or any memory standard other than DDR3 and DDR3L cannot use this product.
The decisive specification is the 1333 MHz PC3-10600 rating combined with dual-voltage 1.35 V / 1.5 V operation; the motherboard must support this exact speed and voltage range for the modules to run at their rated timings.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Timetec |
| Model name | MR-H8GD313U7C |
| Total capacity | 16 GB (2 × 8 GB) |
| Product color | Black PCB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Power | |
| Rated voltage | 1.5 V |
Other versions of this model
Yes, the modules are dual-voltage and rated to run at 1.35 V or 1.50 V, so they are compatible with DDR3L-only boards.
The kit contains two 8 GB UDIMMs, so you need two available 240-pin DDR3 slots to install the full 16 GB.
At 1333 MHz the modules operate at CL9, matching the JEDEC standard for PC3-10600.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?