We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Timken 4-bolt square flange bearing cast iron housing double sealed 1 inch bore

Timken

Timken 4-Bolt Flange Bearing 1" Bore SCJ 1

SKU CH-PR2M-ASFHS

Cast-iron square flange bearing with 1" cylindrical bore, double-sealed radial ball insert, and four-hole mounting for fixed-position shafts

  • Double-sealed protection keeps contaminants out
  • Cast iron housing delivers rigid four-bolt mounting
  • Alloy steel insert handles 520 RPM operation
  • NLGI #2 grease works from -65 to 200 °F
  • 1-inch cylindrical bore fits standard shafts

4-Bolt Flange Bearing with 1" Bore

This Timken bearing unit combines a cast-iron square housing with a radial ball insert for fixed-position shaft support. The 1-inch cylindrical bore fits standard shafts directly, while the double-sealed design retains lubricant and excludes contaminants in industrial machinery applications.

Thermals and Speed Range

Factory-filled with NLGI #2 equivalent grease, the bearing operates continuously from minus 65 degrees F to 200 degrees F. The fixed expansion type handles radial loads at speeds up to 5,520 RPM without external cooling, keeping friction low in normal service.

Cast-Iron Housing and Mounting

Four bolt holes on a 2 3/4-inch center-to-center pattern secure the square flange to flat surfaces, and the 0.409-inch back-side width allows close spacing. The GYA100RRB insert is included, so installation requires only a shaft and fasteners.

How it compares

Measured against everything we stock in General Hardware & Accessories, at today’s prices. Recalculated every night.

Price $57.99
Pricier than about 76% of the 2,607 comparable items (median $18.99).

Specifications

Product
Brand nameTimken

Questions about this item

How do I mount the 4-bolt flange bearing and what is the common alignment error?

Bolt the square cast-iron housing using the four holes on a 2 3/4 in center-to-center pattern; the step most installers miss is shimming the mounting surface so the 1 in cylindrical bore stays perfectly perpendicular to the shaft.

What maintenance will the double-sealed radial ball insert need and when should I plan replacement?

The GYA100RRB insert is factory-filled with NLGI #2 equivalent grease and double-sealed, so no re-lubrication is required; replace the unit if seal damage, abnormal noise or excess radial play appears during inspection.

Which limit — speed or temperature — will I reach first during continuous operation?

The 5,520 RPM maximum speed is typically reached before the 200 °F temperature ceiling in sustained use, so monitor shaft speed as the primary constraint.

More in General Hardware & Accessories

Similar items