Toshiba MG06ACA800E 8TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
10 TB enterprise hard drive with 7200 RPM speed, 256 MB cache and SATA 6.0 Gb/s interface in a helium-sealed 3.5" form factor
Model 10TB 256MB Cache
The Toshiba MG06ACA10TE is a 10TB 3.5" internal hard drive built for enterprise storage workloads. It runs at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. The helium-sealed nine-disk design increases storage density while reducing power draw and vibration.
This model replaces lower-capacity air-filled drives when a single-bay upgrade to 10TB is needed. The jump is worth it for arrays that require higher density without adding spindles. Larger 12TB and 14TB models exist in the same series for workloads that need even more capacity per slot.
Sequential throughput is limited by the SATA 6.0Gb/s link, so sustained reads and writes cannot exceed that bus ceiling. Random I/O performance is bound by 7200 RPM rotational latency and the 256MB buffer size. The 512e sector format ensures compatibility with legacy operating systems and controllers.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | TOSHIBA |
| Model name | MG06ACA10TE |
| Total capacity | 10 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Flash memory type | SLC |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.91 kg |
| Package size | 457 × 305 × 203 mm |
Other versions of this model
The drive measures 26.10mm in height, 101.85mm in width and 147.00mm in length, matching the industry-standard 3.5-inch form factor.
Connect a standard SATA data cable to the motherboard and a SATA power connector from the PSU; no jumpers are required for SATA operation.
The helium-sealed enclosure is maintenance-free for the life of the drive; no user service or gas replenishment is possible or required.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?