Lite-On iHDS118-104 8U DVD-ROM drive 18x 48x SATA 5.25" black
- Bare Drive
- 140 ms
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A beige 5.25" tray-loading DVD-ROM drive reading DVD-ROM at 16x and CD-ROM at 48x over ATAPI/E-IDE with 512KB cache
The Toshiba SD-M1612 is a 5.25-inch beige DVD-ROM drive with an ATAPI/E-IDE interface and a tray-load mechanism. It reads DVD-ROM media at 16x speed and CD-ROM media at 48x speed, making it suitable for legacy system restorations or archival tasks where optical reading is still required.
A 512KB buffer helps maintain steady data flow during long sequential reads across full discs. The drive supports horizontal or vertical mounting without affecting throughput, and its DVD-RAM read capability at 2x adds compatibility for older rewritable cartridges used in industrial archives.
The standard 5.25-inch form factor fits typical desktop bays using four side screws, and the beige front panel matches era-correct chassis aesthetics. Builders must provide a spare IDE channel and a 4-pin Molex power connector; systems lacking legacy IDE ports will need an adapter not included with the drive.
Measured against everything we stock in DVD-ROM & CD-ROM Drives, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | TOSHIBA |
| Model name | SD-M1612 |
| Product type | DVD-ROM Drive |
| Panel color | Beige |
| Storage | |
| Cache memory | 512 KB |
| DVD-ROM speed | 2x for DVD-RAM 16x for DVD-ROM |
| CD-ROM speed | 48X |
| Loading mechanism | Tray |
| Ports & slots | |
| Interface type | ATAPI/E-IDE |
| Size & build | |
| Form factor | 5.25 in (13.3 cm) |
| Shipping weight | 0.99 kg |
| Package size | 193 × 146 × 41 mm |
The drive uses a tray-load mechanism and supports horizontal or vertical mounting, which helps airflow around the 5.25" beige chassis during extended use.
You need a standard 40-pin IDE ribbon cable, a free 5.25" drive bay, and a Molex power connector from the PSU.
Yes, set one drive as master and the other as slave using the jumpers on the rear; both will share the single ATAPI/E-IDE channel.
More in DVD-ROM & CD-ROM Drives
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?