Tripp Lite PS607HG20AOEM power strip 6 outlet 20A 120V 7ft

Medical-grade power strip for patient-care areas

The Tripp Lite PS607HG20AOEM is a hospital-grade power strip built for movable medical equipment in operating rooms, therapy rooms and patient-care vicinities. It delivers 120V power through six NEMA 5-20R-HG outlets with integrated locking safety covers. The all-metal housing carries an EPA-registered antimicrobial coating shown to inhibit 99.9% of microbes on surfaces. Two built-in resettable 20A circuit breakers protect connected devices from overloads.

Check your facility power and mounting needs

Verify that the installation site provides a NEMA 5-20P-HG receptacle and a 120V, 50/60 Hz supply. The unit requires a mounting surface such as an IV pole, mobile cart or workstation where the built-in tabs and flanges can be secured. Confirm that the seven-foot cord length reaches the nearest outlet without strain. The switchless design means the strip cannot be turned off accidentally, so plan for a separate upstream disconnect if one is required by local code.

Thermals, noise and power draw in normal use

The strip has no fan and operates silently in clinical environments. All-metal construction dissipates heat passively across the 1.50 x 2.50 x 13.75 inch chassis. Under full 20A load the internal components run warm but remain within UL 1363A temperature limits. No active cooling is required and the unit adds negligible acoustic noise to patient-care areas. Power consumption is limited to the connected equipment; the strip itself draws no measurable standby current.