Tripp Lite PV400USB 400W power inverter 12V 120V 2 USB 2 outlet
- 2 × 5-15R
- 3 ft (0.91 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 12V DC battery power into 120V AC with 1000W continuous and 2000W peak output for running appliances and tools
The Tripp Lite PV1000HF converts 12V DC battery power into 120V AC electricity. It delivers 1000W continuous and 2000W peak output from a compact metal case. Four AC outlets let you run office gear or tools directly from a vehicle or standalone battery system. Installation uses the included DC terminals for a direct connection.
This unit fits drivers, contractors and field technicians who need mains voltage away from grid power. It runs laptops, chargers and small power tools from a 12V source. It is not for appliances that exceed 1000W continuous draw or installations that cannot accommodate a 175A fuse within 18 inches of the battery. Buyers needing integrated battery charging or solar regulation should look elsewhere.
The continuous 1000W rating determines which combination of devices you can run at once. Peak capacity of 2000W handles brief startup surges only. Match the total load of your connected equipment to the 1000W figure to avoid overload shutdown. Input current reaches 100A at full load, so cabling and fuse sizing must support that draw.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | TRIPP LITE |
| Model name | PV1000HF |
| Ports & slots | |
| Input | Full continuous load - 100A at 12 V DC, No load - 1.5A at 12 V DC, Shutdown / load sense mode - 100 microamps |
| Power | |
| Voltage output | 120 V AC |
| Output power | 1000 W (continuous)/2000 W (peak) |
| Size & build | |
| Shipping weight | 2.54 kg |
| Package size | 330 × 165 × 102 mm |
A properly sized 12 V battery that can supply 100 A continuously, plus a 175 A fuse link installed no more than 18 inches from the battery on the positive cable.
At no load it draws only 1.5 A from the 12 V source, and in shutdown or load-sense mode the draw drops to 100 microamps, so parasitic drain is minimal.
Plug a standard 120 V appliance into one of the four AC outlets; if it powers on and runs normally, the inverter is converting 12 V DC to 120 V AC as intended.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?