Tripp Lite PV3000HF 3000W power inverter
- 2 NEMA 5-15/20R
- Full continuous loa…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 12V DC battery power to 120V AC with 1800W continuous and 3600W peak output for running appliances
Output Peak Power 3600 W
Continuous Watts 1800 W
The Tripp Lite PV1800HF converts 12 V DC battery power into 120 V AC power for mobile or backup use. It supplies 1800 watts continuous output with a 3600 watt peak surge capacity. The unit is designed for users who need to run standard AC appliances from a vehicle or off-grid battery bank.
Under continuous maximum load the inverter pulls 200 A from the 12 V DC source, requiring adequately sized cabling and battery capacity. With no load connected the idle draw is 2.7 A. The pulse-width modulated sine wave output maintains stable voltage for typical resistive and switching loads during extended operation.
The 12 V DC side uses a hardwired connection rather than a plug, limiting quick-disconnect flexibility. Four 120 V AC outlets provide the only load connections. Output frequency is fixed at 60 Hz and the waveform is pulse-width modulated sine wave, which may not suit sensitive medical or precision equipment.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | TRIPP LITE |
| Model name | PV1800HF |
| Ports & slots | |
| Input | Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown |
| Power | |
| Voltage output | 120 V AC |
| Output peak power | 3600 W |
| Continuous watts | 1800 W |
| Size & build | |
| Shipping weight | 4.81 kg |
| Package size | 438 × 197 × 133 mm |
Other versions of this model
At full load the unit draws 200 A from the 12 V source, so significant heat is produced; the built-in fan runs continuously under heavy load, creating audible airflow noise.
You must supply heavy-gauge cables rated for 200 A and a matching 200 A fuse or breaker between the 12 V battery and the inverter’s hardwired terminals.
Most resistive loads and many universal-motor tools work fine, but some older induction motors, microwave ovens or transformer-based gear may run hotter or buzz on this waveform.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?