We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel sprocket with black oxide finish, 32 teeth, 1 3/16 inch bore with keyway

Tritan

Tritan 50BS32H Sprocket 32T 1 3/16in Bore Keyway 50 Chain

SKU CH-M7KR-0V2BS

Steel sprocket with 32 teeth for 50 chain, 1 3/16 in bore, keyway and set screws included

  • Product typeBearings, V-belts & Power Transmission Equipment
  • Product colorTransparent
  • 32 teeth engage 50 chain for smooth power transfer
  • 1 3/16 in bore with 1/4 in keyway locks onto shaft securely
  • Black oxide steel finish resists wear in heavy use
  • 72 in outside diameter fits compact drive layouts
  • Two set screws and keyway prevent slippage under load

32-Tooth #50 Chain Sprocket

The Tritan 50BS32H is a finished-bore steel sprocket built for #50 roller chain. It carries 32 teeth on a 6.72 in outside diameter and a 6.376 in pitch diameter. The 1 3/16 in bore includes a 1/4 in wide by 1/8 in deep keyway plus two set screws for positive shaft locking.

Replaces Worn or Undersized #50 Sprockets

Swap this in when an existing #50 sprocket shows tooth hooking, elongation wear or a damaged keyway. The jump is worth it if the drive requires the 32-tooth count for correct speed ratio or if the 1 3/16 in bore matches the shaft without additional machining.

Fits Single-Strand #50 Drives with 1 3/16 in Shafts

The hub measures 3 1/4 in diameter with a 0.907 in projection and a 1 1/4 in length through bore. It needs a standard #50 chain, a matching key in the shaft keyway and room for the hub projection on the mounted side. It frees the builder from sourcing a separate bushing or reboring a blank sprocket.

How it compares

Measured against everything we stock in Fan Collectibles & Memorabilia, at today’s prices. Recalculated every night.

Price $47.99
Pricier than about 74% of the 1,367 comparable items (median $26.99).

Specifications

Product
Brand nameTRITAN
Product typeBearings, V-belts & Power Transmission Equipment
Product colorTransparent

Questions about this item

What shaft size and keyway dimensions does the 1 3/16 in bore sprocket require?

The fixed bore measures 1 3/16 in and accepts a 1/4 in wide by 1/8 in deep keyway for positive drive engagement.

How do the two included set screws secure the sprocket during installation?

Tighten both set screws evenly against the shaft after aligning the key in the keyway; uneven torque can cause the hub to walk off centre.

When should the sprocket be replaced based on chain wear?

Replace when chain elongation reaches the manufacturer’s limit or when the 32 teeth show visible hooking, typically after several chain replacements.

More in Fan Collectibles & Memorabilia

Similar items