TSUJ 2 in 1 accessory for PMD1204PQB1-A 12V 0.33A 4.0W 9500RPM 40X40X28MM 3-Wire Cooling Fan
Accessory kit designed for the PMD1204PQB1-A 12V 0.33A 4.0W 9500RPM 40×40×28mm 3-wire cooling fan
- Key featuresFor PMD1204PQB1-A 12 V 0.33A 4.0 W 9,500 RPM 40 × 40 × 28MM
- Designed for PMD1204PQB1-A fan compatibility
- 12 V 0.33 A 4.0 W power specification
- 9500 RPM speed for effective cooling
- 40 x 40 x 28 mm compact form factor
TSUJ 2-in-1 accessory for 12V 0.33A cooling fan
This TSUJ 2-in-1 accessory is designed specifically for the PMD1204PQB1-A 12V 0.33A 4.0W 9500RPM 40X40X28MM 3-wire cooling fan. It provides the necessary connection interface to integrate the fan into compatible 2-in-1 laptop systems. The part number Kepler-C72J-OYS-0248 identifies this specific accessory kit. It serves technicians and builders who need to install or replace this exact fan model.
Sustained operation with 3-wire speed monitoring
The accessory supports the fan's 3-wire configuration, allowing the system to monitor rotational speed continuously during extended use. This feedback enables the laptop's thermal management to adjust fan behaviour based on actual RPM data rather than assuming fixed output. Under prolonged load, the connection maintains signal integrity so the controller receives real-time speed information. Buyers who need 4-wire PWM control or a different voltage rating cannot use this accessory.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 95% of the 7,473 comparable items (median $56.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TSUJ |
| Part number | Kepler-C72J-OYS-0248 |
Questions about this item
How loud does the 9500 RPM fan run during continuous operation?
The fan spins at 9500 RPM and draws 0.33 A at 12 V, producing a typical airflow noise level for a 40 mm frame at that speed.
What connector does the 3-wire cooling fan need on the host device?
It requires a standard 3-pin 12 V fan header on the motherboard or controller board to power and monitor the 4.0 W motor.
More in 2-in-1 Device Accessories
Similar items
TSUJ 2 in 1 accessory fan radiator Samsung NP-NC110 NP-NC210 NP-NF310
- New FOR Samsung NP-…
Microsoft GJ3-00001 Docking Station 2 in 1 Accessory
- Docking Station
- Full-Size
TSUJ 2 in 1 accessory Kepler-C72J-OYS-0154 Qosmio X505-Q870 AB7005HX-CD3
- The new FOR TOSHIBA…
Microsoft QC7-00001 Surface Pro 4 Type Cover Black 2 in 1 accessory
- Keyboard Case
- Black
TSUJ 50mm 5V 0.09A Side Turbine Blower Fan 2 in 1 Accessory
- For BFB0505LA-C 50…





