Tripp Lite PV400USB 400W power inverter 12V 120V 2 USB 2 outlet
- 2 × 5-15R
- 3 ft (0.91 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 48 V DC to split-phase 110 V and 220 V AC at 60 Hz with 25000 W continuous and 200000 W peak power, plus integrated UPS, battery charger and LCD monitoring
This pure-sine-wave inverter converts 48 V DC battery power into simultaneous 110 V and 220 V AC at 60 Hz. It delivers 25000 W continuous on each voltage leg and 50000 W total continuous output with a 200000 W peak rating. An integrated UPS and 220 V battery charger provide automatic transfer and recharging in one unit.
Suits installers who need both North-American 110 V and 220 V circuits from a single 48 V bank and who can balance the loads across L1 and L2. Not suited for systems that run exclusively on 110 V without using the 220 V output because the LCD will report only half the actual wattage and current on that leg.
The 200000 W peak figure determines whether motor-starting loads such as well pumps or large compressors can be handled without tripping the inverter. If the intended surge demand exceeds this level a higher-rated unit is required.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | U-POWER |
The unit accepts 48 V DC and delivers split-phase AC with L1+N and L2+N at 110 V plus L1+L2 at 220 V, all at 60 Hz.
Connect the 48 V battery bank to the DC terminals, then wire L1, N and L2 to the distribution panel so that L1+N and L2+N each supply 110 V loads while L1+L2 supplies 220 V loads; the maker recommends balancing 110 V and 220 V loads rather than running 110 V alone.
Plan to inspect the internal cooling fans, DC input cables and terminal connections, and the battery bank itself at regular intervals, as these are the items that degrade with high-current operation.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?