Unique-Bargains 2-Pack 24V 40x40x10mm Case Fan
Two 40 mm brushless fans move air at 24 V and 0.06 A with 18 cm cables and three-pin connectors
- Pushes hot air out of the case
- Draws fresh air in when front-mounted
- 24 V DC brushless motor runs at 0.06 A
- Compact 40 mm square frame fits tight spaces
- 18 cm cable with 3-pin connector reaches motherboard headers
Two-pack 24 V case fans
This pack contains two 40 x 40 x 10 mm brushless fans rated for 24 V DC at 0.06 A. Each unit uses a 1.3 pin connector and ships with an 18 cm cable. The plastic frame measures 1.6 x 1.6 x 0.39 inches and is finished in black. They are designed to exhaust hot air from the rear or draw cool air in through the front of a chassis.
Suited for 24 V cooling slots
Builders with a 24 V fan header or external 24 V supply can use these fans directly. Systems that only provide 5 V or lower-voltage headers cannot drive these units. The twin-pack format also limits usefulness for single-fan replacements or arrays needing three or more matching fans.
24 V DC operating voltage
The fans require a 24 V DC source rated for at least 0.06 A per fan. Connecting them to a different voltage will prevent operation or cause damage. Verify that your motherboard, controller or power supply delivers exactly 24 V before installation.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 95% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
Does the 1.3 pin connector deliver a standard PWM signal or only voltage control?
The 1.3 pin connector supplies power and a tachometer signal; it does not carry a PWM line, so speed is managed by varying the 24 V supply voltage.
Will the 40 x 40 x 10 mm frame fit a standard 40 mm mounting grid?
Yes, the 40 mm square frame matches the common 40 mm hole pattern; the 10 mm thickness clears most chassis walls and drive cages.
How do I connect the 18 cm leads to a motherboard header that expects a 4-pin plug?
Use a 3-pin to 4-pin adapter or plug the 3-pin connector directly onto the 4-pin header, aligning the key; the missing PWM pin will be ignored by the board.
More in PC Cooling Fans
Similar items
ARCTIC COOLING F9 Silent 92mm Case Fan 1000 RPM 21.2 CFM 0.08 Sone 3 Pin
- 92 mm
- Fluid Dynamic
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Link Depot Corp. FAN-8025-B 80mm 3000 RPM 38.2 CFM 32.1 dBA case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Link Depot Corp. FAN-9025-S 92mm 2500RPM 43.5CFM case fan
- 1 Fan
- No Controller





