We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic coin cell holders with metal contacts, DIP mount, for CR2032 or CR2025 batteries

Unique-Bargains

Unique-Bargains 2pcs Black 2P PCB DIP Mount CR2032 CR2025 Battery Socket Holder

SKU CH-WT3V-XR0AN

Two-piece black DIP-mount socket holds a single CR2032 or CR2025 coin cell on a PCB

  • Holds CR2032 and CR2025 cells securely
  • Two-terminal DIP layout simplifies PCB mounting
  • Compact 22 mm diameter fits tight board spaces
  • 20 mm pin spacing matches standard footprints
  • Supplied as a pair for multiple projects

Coin-cell PCB socket — 2-pin DIP mount

This holder accepts a single CR2032 or CR2025 coin cell and mounts through-hole on a printed circuit board. Two black plastic-and-metal sockets are supplied, each weighing 3 g with a maximum body size of 22 x 9 mm. The battery itself is not included.

Replaces loose cells or soldered tabs

The DIP footprint lets you swap a depleted CR2032 or CR2025 without desoldering, which is useful when a design needs occasional replacement or when prototyping boards that will later ship with a fixed cell. The jump is worth it whenever serviceability outweighs the slight height increase of the 9 mm body.

Check pin spacing and cell diameter first

Verify that your PCB layout provides a 20 mm pin pitch and a 20 mm inner diameter to match the holder. Ensure the 0.9 x 0.35 inch outline fits within any enclosure clearance, and confirm the circuit only requires two terminals for the intended coin-cell chemistry.

How it compares

Measured against everything we stock in Disposable & Rechargeable Batteries, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 92% of the 985 comparable items (median $28.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

Will the 20 mm pin spacing match my PCB layout for a CR2032 holder?

The pins are spaced 20 mm apart, matching standard DIP footprints for CR2032 and CR2025 cells.

How do I solder the two terminals without melting the plastic body?

Apply heat briefly to each pin; the plastic body measures 22 x 9 mm and can tolerate normal hand-soldering temperatures.

When should I replace the socket if the spring contacts lose tension?

Replace the holder if coin cells sit loosely or show intermittent contact after repeated insertions.

More in Disposable & Rechargeable Batteries

Similar items