Unique-Bargains 4.8mm Round Recessed Pull Handle Knob Silver Tone

Silver-Tone Recessed Pull Handle for Sliding Doors

This recessed pull handle suits sliding doors, closet doors and invisible wall doors where a flush profile is preferred. The 94 x 75 mm stainless-steel body with brushed electroplated finish resists rust and fading in daily residential use. It is designed for homeowners and installers who want a low-profile latch without a visible key cylinder.

Open-Hole Mounting with 4.8 mm Screw Holes

Installation requires drilling a 4.8 mm diameter hole at a 65 mm centre distance, then fastening the eight supplied self-tapping screws. The thickened zinc-alloy body and solid latch resist deformation, but the door must be thick enough to accept the full screw length without splitting. Misaligned holes or undersized pilot holes are the most common cause of a loose fit.

Check Door Thickness and Hole Spacing Before

Verify that the door panel can accommodate a 94 x 75 mm cut-out and that the 65 mm mounting centres match existing hardware or your drilling template. The 360° rotating pull ring operates without keys, so this lock is not suitable for entries that require keyed security or for doors thinner than the screw length supplied.