We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two brass hose fittings with M12 threads and 8mm barbs, gold tone finish

Unique-Bargains

Unique-Bargains Brass Fitting M12x1.75 Male to 8mm Barb 2pcs

SKU CH-0FFN-N1FFT

Brass M12×1.75 male-to-8 mm barb fitting connects hose to metric ports, supplied as a pair

  • Product typeHose Fittings
  • Solid brass resists corrosion in fuel and water lines
  • One-piece barbed design seals tightly with a clamp
  • M12×1.75 male thread fits metric female ports
  • 8 mm barb accepts standard flexible hose
  • Pack of two fittings covers both ends of a run

Brass M12×1.75 to 8 mm Barb Fitting

This brass fitting connects flexible hose with an 8 mm inner diameter to a metric M12×1.75 female port. The one-piece barbed design creates a positive seal when secured with a clamp or ferrule. Supplied as a pair of new connectors for air, water, fuel, oil or inert gas lines.

Thread Length Limits Engagement

The male thread measures approximately 9 mm in length, so the mating female port must provide at least that much full-thread depth. A total fitting length of 32 mm and a 12 mm hex width determine the installed envelope and the spanner size required for assembly.

8 mm Barb Diameter Decides Fit

The single specification that determines compatibility is the 8 mm hose-barb diameter; the tubing inner diameter must match this size for a secure connection. Mismatched hose ID will leak or blow off regardless of thread match.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 80% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameUnique Bargains
Product typeHose Fittings

Questions about this item

Should I pick the 8 mm barb or the M12×1.75 thread first?

Both dimensions belong to the same fitting; the 8 mm barb accepts 8 mm ID hose and the M12×1.75 male thread mates with a matching female port.

What does the 32 mm total length mean once installed?

The fitting adds roughly 32 mm to the flow path, with 20 mm of barb insertion and 9 mm of thread engagement inside the port.

How does the M12×1.75 thread limit the connection?

It requires a metric M12×1.75 female thread; the 12 mm hex allows standard spanner tightening but cannot adapt to BSP or NPT ports.

More in Hose Fittings, Adapters & Clamps

Similar items