Unique-Bargains dimmer switch
Pack of five momentary SPST push-button switches rated 3 A at 125 V AC for dash mounting in cars, boats or trucks
- Product typeHI - Light & Fan Switches
- Momentary action for temporary circuit control
- SPST normally-open design suits simple on/off tasks
- Rated 3A at 125V AC for low-voltage automotive use
- 12 mm mount diameter fits standard dash panels
- Pack of five switches supports multiple installations
Pack of five momentary push-button switches
This set contains five red push-button switches rated at 3 A / 125 V AC and 1.5 A / 250 V AC. Each unit is a single-pole single-throw normally-open momentary contact suited for low-voltage dash panels in cars, boats or trucks. The plastic-and-metal bodies weigh 14 g each and install in a 12 mm by 24 mm cut-out.
12 mm by 24 mm panel cut-out
The 15 mm by 30 mm overall housing fits the stated mount size, while the 9 mm button diameter provides a clear actuation point. Two KEY_TAB terminals spaced 5.5 mm apart allow quick crimp or solder connections without specialised tooling. Red-and-black colour coding helps identify the switch function at a glance.
Replaces worn or missing dash momentary switches
The pack restores horn, starter, auxiliary-light or other momentary circuits where the original switch has failed. It is not suited for maintained on/off functions, high-current loads above the rated amperage, or panels requiring a different cut-out dimension.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 97% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
| Product type | HI - Light & Fan Switches |
Questions about this item
What voltage and current does the SPST momentary switch handle?
The switch is rated for 3 A at 125 V AC and 1.5 A at 250 V AC.
What panel cut-out and button size are needed to mount these switches?
Each switch fits a 12 mm by 24 mm mounting hole and has a 9 mm diameter button.
How are the two terminals connected and which orientation is correct?
The two terminals have a 5.5 mm pitch; wire them in series with the load so the circuit closes only while the button is held down.
More in Electrical Switches & Dimmers
Similar items
Unique-Bargains SS12F48 10 x 3-pin SPDT slide switch 0.5A 50V DC
- HI - Light & Fan Sw…
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Gardner Bender GSW-22 push-button dimmer switch 6A 120V AC 3A 240V AC black
- Light Switch
Gardner Bender GSW-12 Heavy-Duty SPDT Toggle Switch
- Light Switch





