Unique-Bargains Metal Oxide Film Resistor 39K Ohm 2W 5% 30 Pcs Axial
Pack of 30 axial metal oxide film resistors rated 2 W, 39 kΩ, 5 % tolerance, 350 V working voltage, operating from -55 °C to 155 °C
- Key features39k ohm resistor color code 4 band;2 W metal oxide film resi
- 30-piece kit supports multiple DIY circuit builds
- 2 W power rating handles higher loads than standard film types
- 5 % tolerance keeps resistance values predictable in series or parallel circuits
- Axial leads with 59 mm total length fit standard through-hole boards
- Operating range of -55 to 155 °C suits demanding temperature environments
Metal oxide film resistors for DIY circuits
This pack contains thirty axial-leaded metal oxide film resistors rated at 39 kilohms with a five percent tolerance. They are intended for hobbyists and technicians building or repairing through-hole circuits where a two-watt flame-proof component is required.
Thermal and voltage limits in normal use
The resistors are specified for continuous operation up to two watts and can handle a maximum working voltage of 350 volts. They withstand overload peaks of 600 volts and pulse spikes of 750 volts while operating across a temperature range of -55 to 155 degrees Celsius.
Five percent tolerance defines selection
The single specification that decides suitability is the five percent resistance tolerance. Designs needing tighter precision or a different resistance value will not be served by this kit.
How it compares
Measured against everything we stock in Passive Components & Solder Supplies, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 90% of the 265 comparable items (median $9.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
How do I install these 39K ohm axial resistors on a PCB?
Insert the axial leads through the board holes, solder each joint, then trim the excess lead length; the common mistake is applying excessive heat that damages the metal oxide film coating.
What maintenance or replacement will these 2W metal oxide film resistors need over time?
They require no routine maintenance; replace any unit that shows discolouration, cracked body, or measures outside the 5% tolerance after sustained operation at the 350V working voltage.
Which limit appears first when these 39K ohm resistors run continuously at 2W?
The body temperature will reach the 155°C upper operating limit before the 350V dielectric withstanding voltage or 600V overload voltage ratings are exceeded.
More in Passive Components & Solder Supplies
Similar items
Unique-Bargains 100uF 400V 105C Aluminum Electrolytic Capacitor 3pcs
WUQ 525STID-PWD Plastic Transom Mount 600W 10 pin Multisensor passive component
Unique-Bargains 25W 30 Ohm Aluminium Chassis Mount Wirewound Resistor Gold
- Cool plate Chassis…
Unique-Bargains 25W 7.5k Ohm Wirewound Resistor Aluminium Housing Green 1pcs
- Cool plate Chassis…





