We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small stainless steel MK8 nozzles with M6 threads and 1mm openings for 1.75mm filament

Unique-Bargains

Unique-Bargains MK8 Stainless Steel 1mm Nozzle 1.75mm Filament 2pcs

SKU CH-HXBP-D1E66

Stainless-steel MK8 nozzle with 1 mm outlet for 1.75 mm filament, supplied as a pair

  • Stainless steel resists wear from abrasive filaments
  • 1 mm nozzle diameter prints thicker layers faster
  • M6 thread fits MK8 extruders directly
  • Stamped size marking simplifies identification in storage
  • Pack of two nozzles provides a ready spare

1 mm MK8 Stainless-Steel Nozzle Pair

These two 1 mm stainless-steel nozzles fit MK8 extruder heads and accept 1.75 mm filament. They are intended for makers who want a wider extrusion path for faster prints or composite materials.

Check M6 Thread and 1.75 mm Filament Path

Your printer must use an M6 thread with a 5 mm thread length on the hot-end. The hot-end must also be designed for 1.75 mm filament; other diameters will not feed correctly.

Steady Extrusion at High Temperatures

Stainless steel handles the 180 to 280 °C range shown for PLA and ABS without softening. The consistent bore and clean threads maintain even flow during long prints rather than only during short test extrusions.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 99% of the 5,855 comparable items (median $91.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

Does the pack include any tools or just the two stainless-steel MK8 nozzles?

The package contains only the two 1 mm nozzles; no spanner, socket driver or other tools are supplied.

Why would I choose the 1 mm stainless-steel version over a smaller brass nozzle?

A 1 mm bore extrudes wider lines for faster prints, and stainless steel resists wear from abrasive filaments better than brass.

What temperature range should I set when I swap to this 1 mm nozzle on my MK8 hot-end?

Heat the block to 180–220 °C for PLA or 240–280 °C for ABS before removing the old nozzle and fitting the new one.

More in Print & Scan Accessories

Similar items