Unique-Bargains Nylon PA6 Air Brake Hose 4mm OD x 2.5mm ID x 5m Clear
Clear Nylon PA6 tubing, 4 mm OD by 2.5 mm ID, 5 m length for pneumatic, hydraulic and fluid lines from -35 °C to 105 °C
- Low moisture absorption keeps PA6 flexible for longer service life
- Withstands -35 °C to 105 °C for extreme environments
- Semi-rigid thin wall gives higher flow rates and working pressure
- Compatible with standard push-to-connect and compression fittings
- Suitable for air, water, fuel, chemicals and hydraulic brake systems
What this tubing is and who uses it
This clear nylon PA6 hose measures 4mm outside diameter by 2.5mm inside diameter and comes in a 5m coil. It suits installers who need a lightweight, low-moisture-absorption line for pneumatic, hydraulic brake, fuel, water or chemical circuits in vehicles, industrial equipment or irrigation systems.
Practical limits of the push-to-connect interface
The hose works with standard push-to-connect and compression fittings, but the 2.5mm bore restricts maximum flow compared with larger-bore tubing. Operating range is -35 to 105 Celsius Degree; the material softens above its 215-225 Celsius Degree melting point and becomes brittle below -35 Celsius Degree.
Specification that decides fit
The critical figure is the 2.5mm inside diameter — if your system requires a larger or smaller bore this coil will not seal or flow correctly. Buyers who need a different ID or a coloured tube for circuit identification should look elsewhere.
How it compares
Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 92% of the 973 comparable items (median $21.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
How do I choose the right length for my installation?
This listing supplies a single 5 metre (16.4 ft) coil of 4 mm OD × 2.5 mm ID tubing. Measure the total run you need, add a little extra for bends, and cut the coil to length with a sharp knife or tubing cutter.
What does the 4 mm OD and 2.5 mm ID mean for flow in my system?
The 2.5 mm bore and thin wall give a high flow rate and working pressure for compressed air, water, fuel oil or chemical solvents while keeping the hose light and flexible.
Will standard push-to-connect or compression fittings work with this hose?
Yes. The nylon PA6 tube is made to accept common push-to-connect and compression fittings for quick, tool-free assembly.
More in Garden Hoses & Pipe Tubing
Similar items
Unique-Bargains Brass Round Tube 10mm OD 0.2mm Wall 300mm Length 2 Pcs
- Brass





