We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PTFE tube coiled, 1.5 m long, 4 mm inner diameter, 6 mm outer diameter

Unique-Bargains

Unique-Bargains PTFE Tube 1.5 m ID 4 mm OD 6 mm White

SKU CH-087Z-JCJ44

White PTFE tubing for 3 mm filament, 1.5 m long with 4 mm inner and 6 mm outer diameter

  • Precise 4 mm bore guides 3 mm filament smoothly
  • 5 m length suits most Bowden extruder builds
  • PTFE construction resists heat and chemical wear
  • White colour aids visual filament checks
  • Compatible with Anet, RepRap, Prusa and MendelMax printers

PTFE Tube for 3 mm Filament

This PTFE tube is designed for 3 mm filament and suits most common 3D printers including Anet, RepRap, Prusa and MendelMax models. It provides a low-friction path that helps filament feed smoothly through the extruder assembly.

1.5 m Length with 4 mm Inner Diameter

The tube measures 1.5 metres (4.92 feet) and has a 4 mm inner diameter with a 6 mm outer diameter. Its dimensions allow it to be cut to the exact Bowden length required by a specific printer frame without needing additional tubing stock.

PTFE Material Handles Sustained Heat

PTFE construction tolerates the continuous temperatures found in a hot-end zone better than many plastic alternatives. The tube resists softening during long prints so the filament path stays consistent from start to finish.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 98% of the 5,855 comparable items (median $91.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

How long is the PTFE tube before it needs to be cut to size?

The tube is supplied at 1.5 metres, or 4.92 feet, so you can trim it to the exact length your hot-end requires.

Does the PTFE material handle the heat of an all-day print without degrading?

PTFE is chosen for its high-temperature stability and low friction, letting it guide 3 mm filament through the hot zone continuously.

Which 3D printers already have the 4 mm ID / 6 mm OD bowden fittings this tube matches?

It fits printers such as Anet, RepRap, Prusa and MendelMax that use 4 mm inner-diameter, 6 mm outer-diameter couplers.

More in Print & Scan Accessories

Similar items