Unique-Bargains RJ45 Coupler 10pcs Beige
Connects two CAT5 or CAT5e Ethernet cables with an 8-pin RJ45 female-to-female straight-through coupler, meeting Category 5/5e performance with gold-plated contacts, pack of 10
- Product typeHI - Switch Plates
- Extends Ethernet runs by joining two CAT5/5e cables
- Straight-through 8-pin RJ45 female-to-female wiring
- Gold-plated contacts resist corrosion for reliable signal
- Meets Category 5/5e performance requirements
- Ten couplers in one pack for multiple connections
10-Pack RJ45 Couplers for Ethernet Extension
This pack supplies ten beige RJ45 couplers designed to join two CAT5 or CAT5e cables into a single longer run. Each unit provides an 8-pin female-to-female connection in a straight-through wiring configuration. Gold-plated contacts help maintain signal integrity across the join. The couplers meet Category 5 and 5e performance requirements for 10/100Base-T networks.
Replaces Inline Splices or Custom Crimping
Using these couplers avoids the need to cut, strip and re-terminate cables when a longer reach is required. The upgrade is worth it whenever an existing cable falls short of a device or wall port and a permanent splice would be difficult to inspect or replace. They also simplify temporary test setups where cables must be joined and separated repeatedly.
Check Cable Category and Pinout Before Ordering
Verify that both cables are CAT5 or CAT5e rated; higher-category cables will work but the link will negotiate at the lower specification. Ensure the application uses standard straight-through wiring, as the coupler does not cross transmit and receive pairs. Confirm that 8-pin RJ45 connectors are present on both cable ends.
How it compares
Measured against everything we stock in Light Switch Wall Plates, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 90% of the 363 comparable items (median $12.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
| Product type | HI - Switch Plates |
Questions about this item
What size wall-plate opening does each beige RJ45 coupler fit?
Each coupler is a standard 8-pin RJ45 female-to-female keystone module that snaps into a typical keystone cut-out in a wall plate or surface-mount box.
How do I install the couplers, and what step is often missed?
Snap each coupler into the keystone opening until the retaining clips click, then press both CAT5/5e cables firmly into the gold-plated 8-pin ports until they latch; the step often missed is verifying both cables are fully seated so all eight contacts engage.
When will the gold-plated contacts need replacement?
The gold plating resists oxidation, so under normal indoor use the couplers should not require replacement; only physical damage to the housing or bent contacts would call for a new unit.
More in Light Switch Wall Plates
Similar items
Helping Hands FQ85306 White Outlet Cover With Shelf
- White
- Outlet Cover With S…
Monoprice Inc. 106539 Blank Switch Plate White 10 Pack
- Wall Plates & Jacks
Leviton Manufacturing Co. 1-Gang Single Outlet Receptacle Wall Plate Midway Size Almond 1.406-Inch Opening
- Unknown
- Commercial





