Unique-Bargains RV097NS 5K ohm passive component 2pcs
Two 5K ohm carbon-film potentiometers with switch, single-turn linear taper and knurled split shafts for push-on knobs
- Key featuresHorizontal Multiturn Trimmer Potentiometers; Potentiometer R
- 5K ohm resistance with ±10% tolerance for precise control
- Single-turn carbon film element ensures smooth linear adjustment
- Knurled 6 mm split shaft fits standard push-on knobs
- Horizontal 27 mm body suits breadboard and PCB layouts
- Pack of two potentiometers ready for audio or DIY projects
What this component does
The Unique-Bargains RV097NS is a carbon film potentiometer with an integrated switch, supplied as a pair of 5K ohm variable resistors. It suits hobbyists, repair technicians and students building or fixing audio equipment and other circuits that need manual level control.
The spec that decides fit
Each unit has a 5K ohm resistance value with a ±10 % tolerance, five terminals and a single-turn linear taper. The 6 mm knurled shaft is 10 mm long and accepts standard push-on knobs, while the 6.7 mm thread diameter fits common panel cut-outs.
Heat noise and power in use
As a passive carbon film element it generates no audible noise and negligible heat during normal adjustment. Power dissipation stays within the small 27 mm by 9 mm by 11 mm body without any forced cooling.
How it compares
Measured against everything we stock in Passive Components & Solder Supplies, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 90% of the 265 comparable items (median $9.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
What does the 5K ohm rating mean when the potentiometer is installed in a circuit?
The 5K ohm value sets the total resistance range between the end terminals; turning the shaft varies the divider ratio to adjust signal levels such as audio volume.
How does the 5-terminal layout with a switch affect wiring compared to a standard 3-terminal potentiometer?
Three terminals form the variable resistor track while the extra two connect an integrated switch that actuates at the end of rotation, letting you add on/off control without a separate component.
What panel cut-out and shaft clearance does the 6.7 mm thread and 6 mm shaft need?
Drill a 6.7 mm hole for the threaded bushing; the 6 mm knurled shaft protrudes 10 mm beyond the bushing, so allow at least that depth behind the panel for a push-on knob.
More in Passive Components & Solder Supplies
Similar items
Unique-Bargains 100uF 400V 105C Aluminum Electrolytic Capacitor 3pcs
WUQ 525STID-PWD Plastic Transom Mount 600W 10 pin Multisensor passive component
Unique-Bargains 25W 30 Ohm Aluminium Chassis Mount Wirewound Resistor Gold
- Cool plate Chassis…
Unique-Bargains 25W 7.5k Ohm Wirewound Resistor Aluminium Housing Green 1pcs
- Cool plate Chassis…





