Unique-Bargains Spring Loaded Latch Pin 8.66" 2 Pack Iron Door Lock
Two electroplated-iron spring-loaded barrel bolts, 8.66 inches long with 12 mm bolts, mount vertically or horizontally on doors, gates, sheds or windows
- Product typeDeadbolt Latches
- Durable electroplated iron resists wear and fading
- 12 mm bolt diameter secures doors firmly shut
- Two-pin design allows 90-degree rotation to open
- Vertical or horizontal mounting fits any orientation
- Two latches included for multiple doors or windows
Two-pack iron latch for doors and gates
This two-pack supplies two spring-loaded barrel bolts made from electroplated iron with a silver-tone finish. Each latch measures 8.66 by 1.57 inches overall and uses a 0.47-inch bolt to secure doors, windows, cupboards or shed openings. The design suits both vertical and horizontal mounting so the same hardware fits a range of frame orientations.
Electroplated iron resists wear and fading
The iron construction is electroplated to withstand daily use without fading, keeping the latch functional over a long service life. A sturdy barrel bolt holds the door firmly closed while the spring mechanism operates quietly during normal opening and closing. No power draw or thermal output is involved because the lock is entirely mechanical.
Dual-pin release aids one-hand operation
Each bolt incorporates two pins that let you pull the bolt back and rotate it 90 degrees to lock it in the open position, allowing one-hand entry without the latch springing shut. Mounting holes are 0.24 inches in diameter with a 79 mm by 27 mm spacing pattern, but screws are not included so you must supply suitable fixings for the substrate.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 61% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
| Product type | Deadbolt Latches |
Questions about this item
How do I mount the 220mm iron latch and which step is often missed?
Drill 6mm holes at the 79mm and 27mm centres, fasten with your own screws, then check that the 12mm bolt slides freely before tightening fully; the missed step is verifying bolt travel after the first screw.
What upkeep will the electroplated iron latch need over time?
Wipe the silver tone finish with a dry cloth, lubricate the spring and bolt with light machine oil once a year, and retighten mounting screws if the 40mm wide body shifts.
What is the first limitation you hit when the latch is cycled repeatedly?
The 12mm diameter bolt and spring mechanism are rated for normal residential use; under very high frequency cycling the spring tension will weaken before the iron body shows wear.
More in Door Lock Sets & Deadbolts
Similar items
DNBeffulgent P17 Biometric Door Lock Black 100 Fingerprints 0.5s Auto-Lock 1.18-2.56in Thickness
- Black
- Card
Accuform Door Lock Steering Wheel Cover Do Not Operate 20 HAWA KDD722
Kaba Group 15395YA-04 Satin Brass Yale YA1 door lock
- Keyed Different
- Satin Brass
Unique-Bargains Push Lock for Sliding Glass Cabinet Door 5mm Keyed Alike 2Pcs
- Door Knob Locksets





