We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square DC 12V cooling fan black plastic frame 30x30x32mm 305mm cable two pin connector

Unique-Bargains

Unique-Bargains V6 Cooling Fan DC 12V 30x30x32mm 305mm Cable

SKU CH-8RR0-S52AC

DC 12V cooling fan for 3D printer hotends with 305mm cable and 22mm heatsink fit

  • Cools 3D printer extruders efficiently with DC 12V operation
  • Fits 22 mm heatsinks for direct press-on mounting
  • 305 mm cable allows flexible routing inside printer frames
  • Compact 30 x 30 x 32 mm body suits tight extruder assemblies
  • Standard 2.54 mm 2-pin plug connects to common controller boards

12 V Cooling Fan for 3D Printer Extruders

This 30 x 30 x 32 mm DC fan mounts on a 22 mm heatsink cover to pull heat away from the hot-end. It runs on 12 V and fits RepRap, Rostock, Prusa Mendel, Huxley and similar machines. The 305 mm cable reaches most controller boards without extension.

2-Pin 2.54 mm Connector Simplifies Wiring

The included fan ships with a standard two-pin plug that matches common 3D-printer control boards. No soldering or crimping is required, so installation is a simple press-fit onto the heatsink and a single connector insertion.

25 mm Mounting Pitch and 3 mm Holes

Four mounting holes on a 25 x 25 mm pitch align with typical V6-style hot-end brackets. The compact 30 mm square frame leaves clearance for surrounding components while the 32 mm depth keeps the overall profile low.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 99% of the 5,855 comparable items (median $91.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

Will the 2.54 mm 2-pin connector need an adapter when I replace this fan?

The fan uses a standard 2.54 mm pitch 2-pin plug, so it fits most 3D-printer controller boards directly.

What is the first limit reached when the fan runs continuously at 12 V?

The motor is rated for 12 V DC; exceeding that voltage is the first limit that can cause failure.

How much noise and heat does the 30 × 30 × 32 mm fan produce during all-day printing?

The compact 30 mm frame moves air across a 22 mm heatsink cover, staying cool to the touch while running at 12 V.

More in Print & Scan Accessories

Similar items