Usa Sealing 2112 Clear PVC Tubing 3/8 in ID 1/2 in OD 100 ft
Clear PVC tubing for beverage, dairy and water lines, 3/8 in ID, 1/2 in OD, 100 psi at 140 °F
- Product colorClear
- Clear PVC resists kinks for smooth beverage and water flow
- NSF-approved material meets food and dairy safety standards
- Shore A 65 hardness balances flexibility with pressure resistance
- 100 psi rating handles typical dispensing and supply lines
- Withstands 140 °F for hot water and cleaning cycles
Clear PVC tubing for beverage and water lines
This 100 ft coil of clear PVC tubing is built for beverage, dairy and water applications. It meets NSF standards 33 and 65 for food contact. The material carries a Shore A 65 hardness rating and is not compatible with peristaltic pumps.
Check pressure temperature and fitting dimensions
Verify that your system operates at or below 100 psi and 140 Degrees F before installing this tubing. The inside diameter is 3/8 in and the outside diameter is 1/2 in, so confirm that your barbs, clamps or push-to-connect fittings match those dimensions. No jacket is present on this hose.
Replaces non-food-grade or lower-pressure vinyl hose
Upgrade from standard vinyl tubing that lacks NSF certification or cannot handle 100 psi at elevated temperature. The jump is worth it when you need documented food-contact compliance and a consistent 3/8 in bore across a full 100 ft run without splices.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $95.99
- Pricier than about 76% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Clear |
Questions about this item
What comes in the box and what must I buy separately?
The coil contains 100 ft of clear PVC tubing with 3/8 in inside diameter and 1/2 in outside diameter; no fittings, clamps or tools are included.
Which version or capacity should I choose?
Only the 100 ft roll with Shore A 65 hardness is offered, so select it if the 3/8 in ID, 100 psi and 140 °F limits match the application.
What does the 100 psi figure mean once the tube is installed?
It is the maximum operating pressure the tubing can handle at the rated 140 °F maximum operating temperature.
More in Drain Stoppers, Strainers & Traps
Similar items
Anvil 0308003805 threaded flange 5 x 10 in NPT black cast iron trap
- Drain Components
Valterra 9201GR Gate Valve Class 125 2 In Slip Trap
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Apollo 70LF-207-01 1-1/2" Sweat Bronze Ball Valve Inline Trap
- Drain Components
- White





