We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam-and-groove coupler with 1 in NPT thread

Usa Sealing

Usa Sealing 304SS Cam and Groove Fitting D 1 in Coupler x 1 in Bathware

SKU CH-JW5J-ZFFNV

304 stainless steel cam-and-groove Type D coupler with 1 in FNPT thread and 1 in hose fitting, rated 250 psi at 70 °F, 59 mm overall length, nitrile gasket, no locking arm

  • Product colorTransparent
  • Product typePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion
  • Type D cam and groove design enables quick hose connection
  • 1 inch NPT thread fits standard piping
  • 250 psi working pressure at 70 °F handles demanding flow
  • 59 mm overall length suits compact installations

USA INDUSTRIALS 304SS Cam Groove Coupling

This USA INDUSTRIALS coupling uses 304 stainless steel for a Type D cam and groove socket. It connects a 1 in female NPT thread to a 1 in hose fitting. The body measures 59 mm in overall length with a socket inside diameter of 1 7/16 in. A nitrile gasket seals the joint.

Suits NPT pipe to hose connections

Installers joining 1 in NPT pipe to 1 in hose will find the correct thread and barb size here. The 250 psi rating at 70 F covers many water and air lines. Buyers needing a built-in locking arm or a different gasket material should look at other fittings.

250 psi maximum working pressure at 70 F

The pressure rating of 250 psi at 70 F is the key figure for deciding if this coupler matches the system design. Exceeding this limit risks leaks or failure. Verify the operating pressure and temperature before installation.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 75% of the 1,499 comparable items (median $39.99).

Specifications

Product
Brand nameUSA INDUSTRIALS
Product colorTransparent
Product typePipes, Valves & Fittings

Questions about this item

How hot does the 304 stainless steel cam and groove fitting get when running at 250 psi continuously?

The fitting is rated for a maximum working pressure of 250 psi at 70 F ambient temperature; the metal itself does not generate heat, so its temperature will match the fluid and surrounding environment.

Does the 1 in NPT thread on this Type D coupler require any special tools or sealant to install?

The coupler uses a standard 1 in -11-1/2 NPT thread; you will need a compatible 1 in male NPT fitting, thread sealant or tape, and a suitable wrench for the 1 7/16 in socket diameter.

Will this 1 in 304SS cam and groove coupler connect directly to older brass or iron NPT pipe threads?

Yes, the 1 in NPT female thread follows the same 11-1/2 threads per inch standard used on legacy brass or iron pipe, so it threads on directly without adapters.

More in Bath Accessories & Soap Dispensers

Similar items