We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil 3/8 inch ID 1/2 inch OD 10 ft

Usa Sealing

Usa Sealing ZUSA-HT-1160 PVC Tubing Clear 3/8 ID 1/2 OD 10 ft

SKU CH-ZR52-SKRVW

Clear PVC tubing for beverage, food and water lines, 10 ft length with 3/8 in ID and 1/2 in OD, rated to 20 psi and 140 °F

  • Product colorClear
  • Clear tubing lets you monitor flow visually
  • Food-grade PVC approved for beverage and water contact
  • Shore A 60 hardness resists kinking during use
  • Rated to 20 psi at 140 °F for reliable pressure handling
  • 10 ft length fits peristaltic pump installations

Clear PVC Tubing for Food and Beverage Use

This clear PVC tubing is manufactured for beverage, food and water transfer. The 3/8 inch inside diameter and 1/2 inch outside diameter suit peristaltic pump systems and general fluid handling. It comes in a 10 foot length for flexible installation.

Shore A 60 Hardness With 20 psi Pressure Rating

The material carries a Shore A 60 hardness rating and a maximum operating pressure of 20 psi. It withstands temperatures up to 140 degrees Fahrenheit during normal operation. No jacket is present on the tubing.

Peristaltic Pump Compatibility

Peristaltic pump compatibility allows direct use in dispensing and metering equipment. The clear construction lets operators visually confirm flow and cleanliness. Buyers needing higher pressure ratings or different diameters should look elsewhere.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 78% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameZORO SELECT
Product colorClear

Questions about this item

How do I install the 3/8" ID PVC tubing onto a fitting without kinking it?

Warm the tubing slightly in hot water, push it fully over the barbed fitting until it seats against the shoulder, and secure with a hose clamp; the common mistake is forcing cold tubing which creates a permanent bend.

When should I replace the clear PVC tubing in a food-grade application?

Replace the tubing when the surface turns cloudy, develops micro-cracks, or loses flexibility — Shore A 60 material typically shows these signs after repeated 140 °F sanitising cycles.

What pressure limit will I hit first if I run this tubing continuously on a peristaltic pump?

The 20 psi maximum operating pressure is the limiting factor; sustained pump pressure above that rating will cause the 1/2" OD tube to balloon and eventually burst.

More in Drain Stoppers, Strainers & Traps

Similar items