Usa Sealing ZUSA-HT-26 Reinforced Clear PVC Tubing 1/2" ID x 5/8" OD x 50 ft
Clear reinforced PVC tubing rated 100 psi and 140 °F for beverage, food and water transfer, 50 ft length with 1/2 in inside diameter
- Product colorClear
- Clear tubing lets you spot blockages instantly
- 50 ft length covers long runs without splices
- Food-grade PVC approved for beverage and water lines
- 100 psi rating handles typical supply pressure
- Withstands 140 °F for hot-water use
Clear Reinforced PVC Tubing 50 ft
This reinforced clear PVC tubing is supplied in a 50 ft coil with a 1/2 in inside diameter and a 5/8 in outside diameter. It carries a maximum operating pressure of 100 psi and a maximum operating temperature of 140 Degrees F. The material has a Shore A hardness of 65 and is suitable for beverage, food and water applications.
Suits low-pressure food-grade lines.
Builders needing tubing for beverage dispensing, water transfer or food processing at pressures up to 100 psi will find this coil appropriate. The clear wall allows visual flow checks. It is not compatible with peristaltic pump systems and lacks a protective jacket for abrasive environments.
100 psi maximum operating pressure
The 100 psi pressure rating is the critical limit that determines whether this tubing matches the system design. Exceeding this value risks failure, so verify the circuit pressure before installation. The 140 Degrees F temperature ceiling and Shore A 65 hardness are secondary factors to confirm.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $35.99
- Typical for this category: the median of 4,240 items is $31.99.
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Clear |
Questions about this item
How long can the tubing run at 140 °F before it softens?
The tubing is rated for continuous use up to 140 °F; above that temperature the PVC may lose stiffness and pressure capacity.
What heat or noise does the tubing add when fluid circulates all day?
The clear PVC tubing itself generates no heat and no noise; any temperature rise or sound comes from the pump and the fluid, not the hose.
Which fittings do I need to connect the 1/2 in. ID tubing?
Use barbed or push-to-connect fittings sized for 1/2 in. inside diameter and 5/8 in. outside diameter; clamps secure the joint.
More in Drain Stoppers, Strainers & Traps
Similar items
Valterra 4304GR 3 in Gate Valve Class 125 PVC
- Drain Components
- HAWA
Valterra 4207GR Gate Valve 2 in PVC Class 125 40 psi
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Banjo V150 1-1/2" FNPT Polypropylene Ball Valve Trap
- Drain Components





