We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear reinforced PVC tubing coil, 10 ft length

Usa Sealing

Usa Sealing ZUSA-HT-59 Reinforced Clear PVC Tubing 1/2" ID x 3/4" OD x 10 Ft

SKU CH-Z2DY-V9RS0

Reinforced clear PVC tubing rated 130 psi and 140 °F for beverage, food and water lines

  • Product colorClear
  • Clear tubing lets you monitor flow visually
  • 10 ft length covers extended runs without joints
  • 130 psi rating handles demanding pressure needs
  • 140 °F limit suits hot fluid transfer
  • Shore A 65 hardness balances flexibility with kink resistance

Tubing for Food and Beverage Lines

This reinforced clear PVC tubing is built for beverage, food and water transfer. It carries a Shore A 65 hardness rating and meets the demands of food-grade applications. The clear wall allows visual flow checks during use.

Replacing Unreinforced or Opaque Hose

The braided reinforcement raises the pressure ceiling to 130 psi, a clear step up from soft-wall vinyl that balloons or bursts lower. Upgrade when the system sees pump pulsation, hot water up to 140 Degrees F, or when sanitary inspection requires a transparent line.

Limits of the PVC Construction

The material softens above 140 Degrees F and is not rated for steam or continuous high-heat recirculation. Peristaltic pumps are not compatible, so roller compression will shorten life. The 10 ft coil length fixes the maximum single-run distance without couplers.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameZORO SELECT
Product colorClear

Questions about this item

What barbed fitting size matches the 1/2 in inside diameter?

Use fittings sized for 1/2 in ID hose; the tubing slides over the barb and is secured with a clamp.

How do I attach the tubing without kinking it during installation?

Warm the tubing slightly, push it fully onto the fitting, then tighten the clamp; avoid sharp bends near the connection.

When should I replace the tubing if it carries 140 Degrees F water at 130 psi?

Inspect regularly for hardening, cracks or loss of clarity; replace at the first sign of degradation.

More in Drain Stoppers, Strainers & Traps

Similar items