Usa Sealing ZUSA-HT-758 Semi-Flexible Silicone Tubing 1/4 in ID 3/8 in OD 10 ft
Semi-flexible clear silicone tubing for beverage, dairy and water lines, 10 ft length with 1/4 in ID and 3/8 in OD, rated to 40 psi and 480 °F, Shore A 70 hardness, peristaltic-pump compatible
- Handles 480 °F for high-heat lines
- Food-safe silicone suits beverage and dairy use
- 40 psi rating covers low-pressure systems
- 10 ft coil gives flexible routing length
- Peristaltic-pump compatible for precise fluid transfer
ZUSA-HT-758 Silicone Tubing for Food
This semi-flexible silicone tubing is designed for beverage, dairy, food and water applications. It meets the needs of operators who require a clear, food-grade hose for liquid transfer. The product is supplied in a 10 ft length and is compatible with peristaltic pumps.
40 psi Maximum Operating Pressure
The single specification that decides suitability is the maximum operating pressure of 40 psi combined with a maximum operating temperature of 480 Degrees F. These limits define the safe envelope for pressure and heat in any installation using this tubing.
Suits Low-Pressure Food-Grade Lines.
This tubing suits users who need a clear, Shore A 70 silicone hose for low-pressure food, dairy or beverage lines up to 40 psi. Buyers who need higher pressure ratings or reinforced jackets for hydraulic service should look at alternative products.
How it compares
Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 58% of the 973 comparable items (median $21.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
How does the 480 °F temperature rating hold up when the tubing is installed on a hot-water line?
The silicone material is rated for continuous use up to 480 °F, so it will not soften or degrade on typical hot-water circuits that stay well below that limit.
What does the 40 psi maximum pressure mean for a peristaltic pump setup?
At 40 psi the tubing can handle the discharge pressure of most small peristaltic pumps without ballooning or bursting.
Will the 3/8 in outside diameter fit standard 1/4 in barbed fittings without adapters?
Yes, the 1/4 in inside diameter slides over 1/4 in barbs, and the 3/8 in outside diameter matches common clamp sizes for a secure seal.
More in Garden Hoses & Pipe Tubing
Similar items
Beck C. H. 2" MNPT x 7" TBE Galvanized Steel Pipe Nipple Sch 40
- HAWA





