Ushio 1000283 EGT JS120V-1000WC Halogen Standard Bulb
1000 W halogen projector bulb rated at 28500 lumens, 120 V, with a 200-hour lifespan
- Power rating1000 W
- Light output28500
- Lifespan (hours)200
- Rated voltage120 V
- Product typeHalogen Bulbs
- High 28500 lumen output for bright projection
- 1000 watt halogen lamp delivers intense illumination
- 120 volt operation suits standard mains supply
- Rated 200 hour life for studio sessions
- Ushio model 1000283 EGT halogen bulb
Ushio 1000283 EGT halogen projector lamp
The Ushio 1000283 EGT is a 1000W halogen bulb built for 120V projector fixtures in studios and venues. It delivers 28500 lumens of continuous output for stage, film or installation work. The lamp is rated for 200 hours of service life. It suits technicians who need a direct replacement for EGT-coded sockets.
Thermal output and power draw
At 1000W the lamp converts most input power into heat, so the fixture must provide adequate ventilation. Operation is silent because there are no moving parts or ballast fans. The 120V supply draws the full rated wattage from the moment of ignition. Users should allow cool-down time before handling or relamping.
No bundled accessories or software
The package contains only the halogen bulb itself; no cables, connectors or control software are included. Installation relies entirely on the projector's existing EGT socket and power circuitry. There are no firmware updates or configuration tools to manage. Buyers who need dimming modules or spare sockets must source them separately.
How it compares
Measured against everything we stock in General-Purpose & Specialty Bulbs, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 58% of the 1,791 comparable items (median $17.99).
- Power rating 1000 W
- Higher than about 90% of the 162 comparable items (median 70 W).
Specifications
| Product | |
|---|---|
| Brand name | Ushio |
| Product type | Halogen Bulbs |
| Display | |
| Light output | 28500 |
| Power | |
| Power rating | 1000 W |
| Rated voltage | 120 V |
| More details | |
| Lifespan (hours) | 200 |
Questions about this item
How do I install the 1000W halogen bulb in my projector without shortening its 200-hour life?
Power off and cool the projector completely, then handle the quartz envelope only with clean cotton gloves — skin oils create hot spots that cause early failure. Align the base pins with the socket, press firmly until seated, and avoid over-tightening any retaining clip.
What maintenance or replacement will the EGT JS120V-1000WC need after its rated 200 hours?
The filament will reach end of life at approximately 200 hours; replace the entire bulb — no internal components are serviceable. Keep a spare 1000283 on hand so the projector can be relamped immediately when output drops below 28500 lumens.
What limit appears first when running the 120V 1000W lamp continuously?
The 200-hour rated life is the primary limit; sustained operation at full 1000W will reach this limit before thermal or voltage constraints become an issue.
More in General-Purpose & Specialty Bulbs
Similar items
Ecosmart 25W Equivalent B11 E12 Dimmable Clear Glass LED Vintage Edison Daylight 3-Pack
- Decorative
GE Lighting 94543 14W CFL Spiral 2700K 950lm E26 6-pack
- Compact fluorescent…





